dmesg of first octacore Ubuntu Meizu MX4 ARM Phone

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.10.35+ (root@android-tangxi_1435894567) (gcc version 4.8 (GCC) ) #1 SMP PREEMPT Tue Aug 18 08:29:14 UTC 2015
[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=30c7387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: MT6595, model: MT6595
[    0.000000] [PHY layout]DRAM size (dt) :  0x40000000 - 0x7fffffff  (0x40000000)
[    0.000000] [PHY layout]DRAM size (dt) :  0x80000000 - 0xbd9fffff  (0x3da00000)
[    0.000000] [PHY layout]available DRAM size = 0x80000000
[PHY layout]FB (dt) :  0xbda00000 - 0xbfffffff  (0x2600000)
[    0.000000] fb base: 0x2600000, size: 0xbda00000
[    0.000000] [DFS Check]DRAM SIZE:0x80000000
[    0.000000] [DFS Check]DRAM Dummy read from:0x7fffff80 to 0x80000080
[    0.000000] [DFS Check]DRAM Dummy read center address:0x80000000
[    0.000000] [DFS Check]High Memory start address 0x60000000
[    0.000000] [DFS Check]DFS Dummy read reserved 0x7ffff000 to 0x80001000
[    0.000000] [ccci/cor](0)Get MD info from META
[    0.000000] [ccci/cor](0)md_inf[0]=4
[    0.000000] [ccci/cor](0)md_inf[1]=48
[    0.000000] [ccci/cor](0)md_inf[2]=141
[    0.000000] [ccci/cor](0)md_inf[3]=229
[    0.000000] [ccci/com](1)DT(1):MTK_ENABLE_MD1:0x00000001
[    0.000000] [ccci/com](1)DT(1):MTK_MD1_SUPPORT:0x00000006
[    0.000000] [ccci/com](1)DT(1):MD1_SMEM_SIZE:0x00200000
[    0.000000] [ccci/com](1)DT(1):MD1_SIZE:0x05000000
[    0.000000] [ccci/com](1)DT(0):MTK_ENABLE_MD2:0x00000000
[    0.000000] [ccci/com](1)DT(1):MTK_MD2_SUPPORT:0x00000004
[    0.000000] [ccci/com](1)DT(1):MD2_SMEM_SIZE:0x00200000
[    0.000000] [ccci/com](1)DT(1):MD2_SIZE:0x01600000
[    0.000000] [ccci/com](1)DT(0):MTK_ENABLE_MD5:0x00000000
[    0.000000] [ccci/com](1)DT(1):MTK_MD5_SUPPORT:0x00000005
[    0.000000] [ccci/com](1)Get DFO:MTK_ENABLE_MD1:0x00000001
[    0.000000] [ccci/com](1)Get DFO:MTK_ENABLE_MD2:0x00000000
[    0.000000] [ccci/com](1)Get DFO:MTK_ENABLE_MD5:0x00000000
[    0.000000] [ccci/com](1)Get DFO:MTK_MD1_SUPPORT:0x00000006
[    0.000000] [ccci/com](1)Get DFO:MTK_MD2_SUPPORT:0x00000004
[    0.000000] [ccci/com](1)Get DFO:MTK_MD5_SUPPORT:0x00000005
[    0.000000] [ccci/com](1)Get DFO:MD1_SIZE:0x05000000
[    0.000000] [ccci/com](1)Get DFO:MD2_SIZE:0x01600000
[    0.000000] [ccci/com](1)Get DFO:MD1_SMEM_SIZE:0x00200000
[    0.000000] [ccci/com](1)Get DFO:MD2_SMEM_SIZE:0x00200000
[    0.000000] [ccci/err/com](1)DFO Setting for md2 conflict: <0:0x01600000:0x00200000>
[    0.000000] [PHY layout]ccci_md_mem_reserve   :   0x6a000000 - 0x6f1fffff (0x05200000)
[    0.000000] [ccci/cor](0)md1 mem reserve successfully, ptr=0x6a000000, size=0x5200000
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] [PHY layout]kernel   :   0x40000000 - 0x69ffffff (0x2a000000)
[    0.000000] creating mapping start pa: 0x40000000 @ 0xc0000000 , end pa: 0x60000000 @ 0xe0000000
[    0.000000] [PHY layout]kernel   :   0x6f200000 - 0x7fffefff (0x10dff000)
[    0.000000] [PHY layout]kernel   :   0x80001000 - 0xbd9fffff (0x3d9ff000)
[    0.000000] On node 0 totalpages: 493566
[    0.000000] free_area_init_node: node 0, pgdat c0ee49c0, node_mem_map c1373000
[    0.000000]   Normal zone: 1024 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 131072 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2996 pages used for memmap
[    0.000000]   HighMem zone: 362494 pages, LIFO batch:31
[    0.000000] Load default dfo data...
[    0.000000] parse_dfo_tag start
[    0.000000] tag_header size: 8, tag_dfo_boot size: 36
hdr.size: 128
[    0.000000] number of tags: 14
[    0.000000] dfo[0]: MD5_SIZE, 0x01600000
[    0.000000] dfo[1]: MD5_SMEM_SIZE, 0x00200000
[    0.000000] dfo[2]: MTK_MD5_SUPPORT, 0x00000005
[    0.000000] dfo[3]: MTK_ENABLE_MD5, 0x00000000
[    0.000000] dfo[4]: MTK_ENABLE_MD1, 0x00000001
[    0.000000] dfo[5]: MTK_ENABLE_MD2, 0x00000000
[    0.000000] dfo[6]: MD1_SIZE, 0x05000000
[    0.000000] dfo[7]: MD2_SIZE, 0x01600000
[    0.000000] dfo[8]: MD1_SMEM_SIZE, 0x00200000
[    0.000000] dfo[9]: MD2_SMEM_SIZE, 0x00200000
[    0.000000] dfo[10]: MTK_MD1_SUPPORT, 0x00000006
[    0.000000] dfo[11]: MTK_MD2_SUPPORT, 0x00000004
[    0.000000] dfo[12]: LCM_FAKE_WIDTH, 0x00000000
[    0.000000] dfo[13]: LCM_FAKE_HEIGHT, 0x00000000
[    0.000000] [BOOT_COMMON] init_boot_common 1665 [10 7] [1]
[    0.000000] [BOOT_COMMON] init_boot_common 1665 [0 4] [2]
[    0.000000] PERCPU: Embedded 9 pages/cpu @c2337000 s12928 r8192 d15744 u36864
[    0.000000] pcpu-alloc: s12928 r8192 d15744 u36864 alloc=9*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 492542
[    0.000000] Kernel command line: console=tty0 console=ttyMT0,115200n8 root=/dev/ram vmalloc=496M slub_max_order=0 slub_debug=O  lcm=1-hx8399_fhd_dsi_vdo_sharp fps=6085 vram=39845888 printk.disable_uart=1 bootprof.pl_t=6886 bootprof.lk_t=5334 androidboot.serialno=75HABLMXZ3TE boot_reason=4 systempart=/dev/disk/by-partlabel/system datapart=/dev/disk/by-partlabel/userdata fixrtc eof
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 672MB 269MB 985MB = 1927MB total
[    0.000000] Memory: 1933076k/1933076k available, 125164k reserved, 1449972K highmem
[    0.000000] Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    vmalloc : 0xe0800000 - 0xff000000   ( 488 MB)
    lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc0da35f8   (13934 kB)
      .init : 0xc0da4000 - 0xc0e29280   ( 533 kB)
      .data : 0xc0e2a000 - 0xc0eea7f0   ( 770 kB)
       .bss : 0xc0eea7f0 - 0xc13723bc   (4639 kB)
[    0.000000] SLUB: HWalign=64, Order=0-0, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:485
[    0.000000] GPT1_CMP = 130000, HZ = 100
[    0.000000] sched_clock: 32 bits at 13MHz, resolution 76ns, wraps every 330382ms
[    0.000000] enable_cpuxgpt: reg(201)
[    0.000000] Switching to timer-based delay loop
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [tty0] enabled
[    0.000000] [UART] mtk console setup : co->index 0 options:115200n8
[    0.000000] No Flow Control
[    0.000000] [UART] mtk console setup : uart_set_option port(0) baud(115200) parity(n) bits(8) flow(n) - ret(0)
[    0.000000] [UART] mtk setting: (0, 0, 0, 0, 128)
[    0.000000] console [ttyMT0] enabled
[    0.000000] ram_console_early_init: start: 0xf900dc00, size: 9216
[    0.000000] ram_console: found existing buffer,size 8776, start 7542
[    0.000000] console [ram-1] enabled
[    0.003128] Calibrating delay loop (skipped), value calculated using timer frequency.. 26.00 BogoMIPS (lpj=130000)
[    0.003148] pid_max: default: 32768 minimum: 301
[    0.003362] Security Framework initialized
[    0.003450] AppArmor: AppArmor initialized
[    0.003459] Yama: becoming mindful.
[    0.003568] Mount-cache hash table entries: 512
[    0.004605] Initializing cgroup subsys freezer
[    0.004659] CPU: Testing write buffer coherency: ok
[    0.004707] ftrace: allocating 39594 entries in 117 pages
[    0.096894] CPU0: update cpu_power 667
[    0.096916] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.096962] Setting up static identity map for 0xc08c0a88 - 0xc08c0ae0
[    0.137330] ftrace: Allocated trace_printk buffers
[    0.137477] tag_devinfo_data_rid, indx[12]:0xb46ce444
[    0.137510] chip info, indx[20]:0x6595
[    0.137530] tag_devinfo_data size:38
[    0.157230] SCHED: intersects new_mask: 2, cpu_active_mask: 1
[    0.157340] SCHED: intersects new_mask: 2, cpu_active_mask: 1
[    0.157794] CPU1: update cpu_power 667
[    0.157810] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.158250] SCHED: intersects new_mask: 4, cpu_active_mask: 3
[    0.158363] SCHED: intersects new_mask: 4, cpu_active_mask: 3
[    0.158823] CPU2: update cpu_power 667
[    0.158838] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.159244] SCHED: intersects new_mask: 8, cpu_active_mask: 7
[    0.159345] SCHED: intersects new_mask: 8, cpu_active_mask: 7
[    0.159791] CPU3: update cpu_power 667
[    0.159806] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.160209] SCHED: intersects new_mask: 16, cpu_active_mask: 15
[    0.160305] SCHED: intersects new_mask: 16, cpu_active_mask: 15
[    0.160883] CPU4: update cpu_power 1381
[    0.160912] CPU4: thread -1, cpu 0, socket 1, mpidr 80000100
[    0.161525] SCHED: intersects new_mask: 32, cpu_active_mask: 31
[    0.161692] SCHED: intersects new_mask: 32, cpu_active_mask: 31
[    0.162260] CPU5: update cpu_power 1381
[    0.162287] CPU5: thread -1, cpu 1, socket 1, mpidr 80000101
[    0.162978] SCHED: intersects new_mask: 64, cpu_active_mask: 63
[    0.163141] SCHED: intersects new_mask: 64, cpu_active_mask: 63
[    0.163733] CPU6: update cpu_power 1381
[    0.163760] CPU6: thread -1, cpu 2, socket 1, mpidr 80000102
[    0.164403] SCHED: intersects new_mask: 128, cpu_active_mask: 127
[    0.164550] SCHED: intersects new_mask: 128, cpu_active_mask: 127
[    0.165138] CPU7: update cpu_power 1381
[    0.165165] CPU7: thread -1, cpu 3, socket 1, mpidr 80000103
[    0.165378] Brought up 8 CPUs
[    0.165402] SMP: Total of 8 processors activated (208.00 BogoMIPS).
[    0.165415] CPU: All CPU(s) started in SVC mode.
[    0.167379] devtmpfs: initialized
[    0.178233] EVM: security.selinux
[    0.178248] EVM: security.SMACK64
[    0.178261] EVM: security.capability
[    0.179450] sched: registering cpufreq notifiers for scale-invariant loads
[    0.179499] M75 Power mode init, default POWER_MODE_1
[    0.179544] M75 Power mode List
[    0.179575] name: big_freq, little_freq, gpu_freq, little_num, big_num, little_turbo, big_turbo, turbo_temp
[    0.179602] low: 1690000, 1690000, 396500, 4, 0, 0, 0, 47
[    0.179647] normal: 1937000, 1690000, 396500, 4, 2, 1, 0, 50
[    0.179693] high: 2210000, 1690000, 598000, 4, 4, 1, 1, 57
[    0.183593] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.184172] [PWRAP] common driver init, version $Revision$
[    0.185932] set irq 187 to cpu 0
[    0.185951] reg 0xf02218b8 = 0x00010101
[    0.185968] set irq 187 to cpu 0
[    0.185983] reg 0xf02218b8 = 0x01010101
[    0.186009] set irq 188 to cpu 0
[    0.186025] reg 0xf02218bc = 0x01010100
[    0.186039] set irq 188 to cpu 1
[    0.186054] reg 0xf02218bc = 0x01010102
[    0.186080] set irq 189 to cpu 0
[    0.186096] reg 0xf02218bc = 0x01010002
[    0.186110] set irq 189 to cpu 2
[    0.186125] reg 0xf02218bc = 0x01010402
[    0.186150] set irq 190 to cpu 0
[    0.186165] reg 0xf02218bc = 0x01000402
[    0.186180] set irq 190 to cpu 3
[    0.186195] reg 0xf02218bc = 0x01080402
[    0.186219] set irq 191 to cpu 0
[    0.186234] reg 0xf02218bc = 0x00080402
[    0.186248] set irq 191 to cpu 4
[    0.186264] reg 0xf02218bc = 0x10080402
[    0.186289] set irq 192 to cpu 0
[    0.186304] reg 0xf02218c0 = 0x01010100
[    0.186318] set irq 192 to cpu 5
[    0.186333] reg 0xf02218c0 = 0x01010120
[    0.186357] set irq 193 to cpu 0
[    0.186373] reg 0xf02218c0 = 0x01010020
[    0.186387] set irq 193 to cpu 6
[    0.186402] reg 0xf02218c0 = 0x01014020
[    0.186427] set irq 194 to cpu 0
[    0.186442] reg 0xf02218c0 = 0x01004020
[    0.186456] set irq 194 to cpu 7
[    0.186471] reg 0xf02218c0 = 0x01804020
[    0.186583] [SPM] PWAKE_EN:1, PCMWDT_EN:1, BYPASS_SYSPWREQ:0, I2C_CHANNEL:1
[    0.187179] [EINT]CUST_EINT_MD1_CNT:1
[    0.187216] [EINT] MD1 name = MD1_SIM1_HOT_PLUG_EINT
[    0.187250] [EINT] MD1 type = 1
[    0.187858] CIRQ init...
[    0.187884] CIRQ handler init success.
[    0.187932] CIRQ init done...
[    0.187948] CIRQ create sysfs file done...
[    0.188000] [CCI] CCI 400 driver init done.
[    0.188118] [DRAMC Driver] Store Vcore DVFS settings...
[    0.188142] [vcore dvfs][kernel]low_freq_pll_setting_addr = 0xce000784, value[0] = 0x800ef41a
[    0.188198] [vcore dvfs][kernel]low_freq_cha_setting_addr = 0xce0007d4, value[0] = 0x77fd474b
[    0.188253] [vcore dvfs][kernel]low_freq_chb_setting_addr = 0xce0008a0, value[0] = 0x77fd474b
[    0.188307] [vcore dvfs][kernel]high_freq_pll_setting_addr = 0xce00096c, value[0] = 0x800f13b1
[    0.188362] [vcore dvfs][kernel]high_freq_cha_setting_addr = 0xce0009bc, value[0] = 0x77fd474b
[    0.188415] [vcore dvfs][kernel]high_freq_chb_setting_addr = 0xce000a88, value[0] = 0x77fd474b
[    0.188464] [vcore dvfs][kernel]pll_setting_num = 20
[    0.188498] [vcore dvfs][kernel]freq_setting_num = 51
[    0.188539] [vcore dvfs]pll_high_addr = 0xce00096c, pll_low_addr = 0xce000784, num = 20
[    0.188586] [DRAMC Driver] Register MD32 Vcore DVFS Handler...
[    0.188604] [DRAMC Driver] Dram Data Rate = 1792
[    0.188681] [WDK]arch init check_bit=0xfe+++++
[    0.188718] [WDK]arch init check_bit=0xff-----
[    0.188799] Fail to enable interrupt 13
[    0.188836] Request FIQ for FIQ_SMP_CALL_SGI
[    0.188902]
[    0.188907] Fail to enable interrupt 13
[    0.188911]
[    0.188915]
[    0.188918]
[    0.188923] Fail to enable interrupt 13
[    0.188929]
[    0.188933] Request FIQ for FIQ_SMP_CALL_SGI
[    0.188936] Request FIQ for FIQ_SMP_CALL_SGI
[    0.188939] Request FIQ for FIQ_SMP_CALL_SGI
[    0.188942] Request FIQ for FIQ_SMP_CALL_SGI
[    0.188946] Request FIQ for FIQ_SMP_CALL_SGI
[    0.188956] Request FIQ for FIQ_SMP_CALL_SGI
[    0.189146] Request FIQ for FIQ_SMP_CALL_SGI
[    0.189231] systracker init done
[    0.203843] bio: create slab at 0
[    0.205058] SCSI subsystem initialized
[    0.205233] usbcore: registered new interface driver usbfs
[    0.205313] usbcore: registered new interface driver hub
[    0.205494] usbcore: registered new device driver usb
[    0.206010] Advanced Linux Sound Architecture Driver Initialized.
[    0.206709] mt-rtc mt-rtc: rtc core: registered mt-rtc as rtc0
[    0.206755] [ccci/cor](0)ccci core init
[    0.206816] [ccci/cor](0)CCCI version: 0x20110118
[    0.206854] [ccci/com](1)MD1_EN(1):MD2_EN(0):MemBase(0x6A000000)
[    0.206911] [ccci/com](1)MemStart(0x6A000000:0x0):MemSize(0x05000000:0x00000000)
[    0.206967] [ccci/com](1)SmemStart(0x6F000000:0x0):SmemSize(0x00200000:0x00000000)
[    0.207043] [ccci/bfm](0)MTU=3456/1500, pool size 256/256/64
[    0.208970] Bluetooth: Core ver 2.16
[    0.209042] Bluetooth: HCI device and connection manager initialized
[    0.209071] Bluetooth: HCI socket layer initialized
[    0.209094] Bluetooth: L2CAP socket layer initialized
[    0.209139] Bluetooth: SCO socket layer initialized
[    0.209464] ------------[ cut here ]------------
[    0.209530] WARNING: at /root/tangxi/kernel/net/wireless/reg.c:434 regulatory_init+0x84/0x120()
[    0.209581] db.txt is empty, you should update it...
[    0.209609] Modules linked in:

[    0.209710] [] (unwind_backtrace+0x0/0xe8) from [] (dump_stack+0x20/0x24)
[    0.209797] [] (dump_stack+0x20/0x24) from [] (warn_slowpath_common+0x5c/0x7c)
[    0.209882] [] (warn_slowpath_common+0x5c/0x7c) from [] (warn_slowpath_fmt+0x40/0x48)
[    0.209971] [] (warn_slowpath_fmt+0x40/0x48) from [] (regulatory_init+0x84/0x120)
[    0.210056] [] (regulatory_init+0x84/0x120) from [] (cfg80211_init+0x60/0xd0)
[    0.210136] [] (cfg80211_init+0x60/0xd0) from [] (do_one_initcall+0xdc/0x204)
[    0.210216] [] (do_one_initcall+0xdc/0x204) from [] (kernel_init_freeable+0x110/0x1d8)
[    0.210304] [] (kernel_init_freeable+0x110/0x1d8) from [] (kernel_init+0x1c/0xf8)
[    0.210393] [] (kernel_init+0x1c/0xf8) from [] (ret_from_fork+0x14/0x20)
[    0.210469] ---[ end trace 624c7c7186352760 ]---
[    0.210678] cfg80211: Calling CRDA to update world regulatory domain
[    0.210719] NetLabel: Initializing
[    0.210737] NetLabel:  domain hash size = 128
[    0.210750] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.210856] NetLabel:  unlabeled traffic allowed by default
[    0.211937] Switching to clocksource mt-gpt
[    0.239535] AppArmor: AppArmor Filesystem Enabled
[    0.253707] kpd: Power Key generate, pressed=0
[    0.253747] KPD input device not ready
[    0.255210] ------------[ cut here ]------------
[    0.255271] WARNING: at /root/tangxi/kernel/kernel/irq/manage.c:437 __enable_irq+0x88/0xd0()
[    0.255321] Unbalanced enable for IRQ 286
[    0.255351] Modules linked in:

[    0.255440] [] (unwind_backtrace+0x0/0xe8) from [] (dump_stack+0x20/0x24)
[    0.255525] [] (dump_stack+0x20/0x24) from [] (warn_slowpath_common+0x5c/0x7c)
[    0.255610] [] (warn_slowpath_common+0x5c/0x7c) from [] (warn_slowpath_fmt+0x40/0x48)
[    0.255697] [] (warn_slowpath_fmt+0x40/0x48) from [] (__enable_irq+0x88/0xd0)
[    0.255782] [] (__enable_irq+0x88/0xd0) from [] (enable_irq+0x74/0x88)
[    0.255846] ********** BUCK/LDO status dump [1:ON,0:OFF]**********
[    0.255874] [] (enable_irq+0x74/0x88) from [] (pmic_thread_kthread_mt6331+0x278/0x294)
[    0.255918] [] (pmic_thread_kthread_mt6331+0x278/0x294) from [] (kthread+0xb0/0xbc)
[    0.255958] [] (kthread+0xb0/0xbc) from [] (ret_from_fork+0x14/0x20)
[    0.255969] ---[ end trace 624c7c7186352761 ]---
[    0.256044] DVFS11      =1, DVFS12      =1, DVFS13      =1, DVFS14      =1
[    0.256110] VGPU        =0, VCORE1      =0, VCORE2      =1, VIO18       =1
[    0.256173] NA          =0, VRTC        =1, VTCXO1      =1, VTCXO2      =0
[    0.256237] VAUD32      =1, VAUXA32     =1, VCAMA       =0, VIO28       =1
[    0.256300] VCAM_AF     =0, VMC         =1, VMCH        =0, VEMC33      =1
[    0.256362] VGP1        =0, VGP4        =0, VSIM1       =0, VSIM2       =0
[    0.256425] VFBB        =0, VMIPI       =0, VIBR        =0, VCAMD       =0
[    0.256488] VUSB10      =1, VCAM_IO     =1, VSRAM_DVFS1 =1, VGP2        =0
[    0.256550] VGP3        =0, VBIASN      =1
[    0.256588] VAUXB32     =1, VBIF28      =1, VUSB33      =1, VSRAM_DVFS2 =1
[    0.256650] VDRAM       =1, VDVFS2      =1
[    0.256688] VRF1        =1, VRF2        =0, VPA         =0, VSBST       =0
[    0.256738] ------------[ cut here ]------------
[    0.256772] WARNING: at /root/tangxi/kernel/kernel/irq/manage.c:437 __enable_irq+0x88/0xd0()
[    0.256781] Unbalanced enable for IRQ 287
[    0.256791] Modules linked in:

[    0.256835] [] (unwind_backtrace+0x0/0xe8) from [] (dump_stack+0x20/0x24)
[    0.256877] [] (dump_stack+0x20/0x24) from [] (warn_slowpath_common+0x5c/0x7c)
[    0.256917] [] (warn_slowpath_common+0x5c/0x7c) from [] (warn_slowpath_fmt+0x40/0x48)
[    0.256957] [] (warn_slowpath_fmt+0x40/0x48) from [] (__enable_irq+0x88/0xd0)
[    0.256996] [] (__enable_irq+0x88/0xd0) from [] (enable_irq+0x74/0x88)
[    0.257040] [] (enable_irq+0x74/0x88) from [] (pmic_thread_kthread_mt6332+0x438/0x454)
[    0.257082] [] (pmic_thread_kthread_mt6332+0x438/0x454) from [] (kthread+0xb0/0xbc)
[    0.257121] [] (kthread+0xb0/0xbc) from [] (ret_from_fork+0x14/0x20)
[    0.257136] ---[ end trace 624c7c7186352762 ]---
[    0.259308] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[    0.259458] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.259599] TCP: Hash tables configured (established 4096 bind 4096)
[    0.259681] TCP: reno registered
[    0.259707] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.259751] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.260548] Trying to unpack rootfs image as initramfs...
[    0.690763] Freeing initrd memory: 4344K (c4000000 - c443e000)
[    0.691689] GPT: init
[    0.692010] [BOOT] CHIP = 0x6595 0x8a00
[    0.692115] [BOOT] CHIP = 0x0006 0x19c3 0x00b4 0x0001
[    0.692160] [BOOT] [create_sysfs] No atag,meta found !
[    0.692258] [HPS] hps_init
[    0.692285] [HPS] hps_cpu_init
[    0.692318] [HPS] hps_ctxt.little_cpumask: 0-3
[    0.692352] [HPS] hps_ctxt.big_cpumask: 4-7
[    0.692398] [HPS] hps_cpu_init: little_cpu_id_min: 0, little_cpu_id_max: 3, big_cpu_id_min: 4, big_cpu_id_max: 7
[    0.692451] [HPS] hps_core_init
[    0.692648] [HPS] hps_task_start success, ptr: df9ed780, pid: 57
[    0.692659] [HPS] hps_ctxt.init_state: 0
[    0.692666] [HPS] hps_ctxt.state: 0
[    0.692672] [HPS] hps_ctxt.enabled: 1
[    0.692679] [HPS] hps_ctxt.early_suspend_enabled: 1
[    0.692688] [HPS] hps_ctxt.suspend_enabled: 1
[    0.692694] [HPS] hps_ctxt.is_hmp: 1
[    0.692701] [HPS] hps_ctxt.little_cpu_id_min: 0
[    0.692711] [HPS] hps_ctxt.little_cpu_id_max: 3
[    0.692718] [HPS] hps_ctxt.big_cpu_id_min: 4
[    0.692724] [HPS] hps_ctxt.big_cpu_id_max: 7
[    0.692917] [HPS] hps_procfs_init
[    0.693293] Initialize EMI MPU.
[    0.693308] [EMI MPU] EMI_MPUP = 0x0
[    0.693340] [EMI MPU] EMI_MPUQ = 0x0
[    0.693370] [EMI MPU] EMI_MPUR = 0x0
[    0.693400] [EMI MPU] EMI_MPUY = 0x0
[    0.693430] [EMI MPU] EMI_MPUS = 0x0
[    0.693459] [EMI MPU] EMI_MPUT = 0x0
[    0.693489] [EMI MPU] EMI_WP_ADR = 0x0
[    0.693520] [EMI MPU] EMI_WP_CTRL = 0x0
[    0.693550] [EMI MPU] EMI_CHKER = 0x0
[    0.693581] [EMI MPU] EMI_CHKER_TYPE = 0x0
[    0.693612] [EMI MPU] EMI_CHKER_ADR = 0x0
[    0.693647] [EMI MPU] Not 4G mode
[    0.693700] [EMI] EMI_CONA =  0x50535057
[    0.693732] [EMI] Support channel number 2
[    0.693765] [EMI] Channel 0 : rank 0 : 4 Gb, segment no : 8
[    0.693803] [EMI] Channel 0 : rank 1 : 4 Gb, segment no : 8
[    0.693840] [EMI] Channel 1 : rank 0 : 4 Gb, segment no : 8
[    0.693878] [EMI] Channel 1 : rank 1 : 4 Gb, segment no : 8
[    0.694704] [Power/cpufreq] @_mt_cpufreq_pdrv_init():5204, chip_ver = 1, little.cpu_id = 0, cpumask_little = 0x0000000F, big.cpu_id = 4, cpumask_big = 0x000000F0
[    0.696364] audit: initializing netlink socket (disabled)
[    0.696438] type=2000 audit(0.630:1): initialized
[    0.697493] bounce pool size: 64 pages
[    0.703151] VFS: Disk quotas dquot_6.5.2
[    0.703600] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.707748] fuse init (API version 7.22)
[    0.708255] msgmni has been set to 952
[    0.711990] io scheduler noop registered
[    0.712010] io scheduler deadline registered (default)
[    0.728531] brd: module loaded
[    0.732699] loop: module loaded
[    0.734460] tun: Universal TUN/TAP device driver, 1.6
[    0.734478] tun: (C) 1999-2004 Max Krasnyansky
[    0.734692] PPP generic driver version 2.4.2
[    0.734907] PPP BSD Compression module registered
[    0.734923] PPP Deflate Compression module registered
[    0.734949] PPP MPPE Compression module registered
[    0.735169] usbcore: registered new interface driver cdc_acm
[    0.735186] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    0.735272] usbcore: registered new interface driver usblp
[    0.735356] usbcore: registered new interface driver usb-storage
[    0.735415] usbcore: registered new interface driver ums-alauda
[    0.735473] usbcore: registered new interface driver ums-cypress
[    0.735530] usbcore: registered new interface driver ums-datafab
[    0.735586] usbcore: registered new interface driver ums-freecom
[    0.735647] usbcore: registered new interface driver ums-isd200
[    0.735705] usbcore: registered new interface driver ums-jumpshot
[    0.735762] usbcore: registered new interface driver ums-karma
[    0.735820] usbcore: registered new interface driver ums-onetouch
[    0.735882] usbcore: registered new interface driver ums-sddr09
[    0.735938] usbcore: registered new interface driver ums-sddr55
[    0.735995] usbcore: registered new interface driver ums-usbat
[    0.736061] usbcore: registered new interface driver trancevibrator
[    0.736729] mousedev: PS/2 mouse device common for all mice
[    0.736954] i2c /dev entries driver
[    0.737271] device-mapper: uevent: version 1.0.3
[    0.737626] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[    0.739382] usbcore: registered new interface driver usbhid
[    0.739397] usbhid: USB HID core driver
[    0.739412] inv_mpu: sensor hub init inv_mpu_init
[    0.740052] zram: Created 1 device(s) ...
[    0.740097] ion_init()
[    0.741404] ashmem: initialized
[    0.741647] logger: created 256K log 'log_main'
[    0.741885] logger: created 256K log 'log_events'
[    0.742148] logger: created 256K log 'log_radio'
[    0.742376] logger: created 256K log 'log_system'
[    0.742710] [MOTOR] motor_init
[    0.742787] [MOTOR] motor_init
[    0.744268] usbcore: registered new interface driver snd-usb-audio
[    0.744366] usbcore: registered new interface driver snd-ua101
[    0.744491] usbcore: registered new interface driver snd-usb-caiaq
[    0.744585] usbcore: registered new interface driver snd-usb-6fire
[    0.750112] mt-soc-dummy-codec mt-soc-dummy-codec: dev name mt-soc-dummy-codec
[    0.750452] mt-soc-codec mt-soc-codec: dev name mt-soc-codec
[    0.751281] soc-audio soc-audio: ASoC: machine mt-snd-card should use snd_soc_register_card()
[    0.756791] soc-audio soc-audio:  mt-soc-codec-tx-dai <-> mt-soc-dl1dai-driver mapping ok
[    0.759302] soc-audio soc-audio:  mt-soc-codec-rx-dai <-> mt-soc-ul1dai-driver mapping ok
[    0.761955] soc-audio soc-audio:  mt-soc-codec-pcmtx-dai <-> mt-soc-voicedai-driver mapping ok
[    0.764673] soc-audio soc-audio:  mt-soc-hdmi-dummy-dai-codec <-> mt-soc-hdmidai-driver mapping ok
[    0.767239] soc-audio soc-audio:  mt-soc-codec-uldlloopback-dai <-> mt-soc-uldlloopbackdai-driver mapping ok
[    0.769857] soc-audio soc-audio:  mt-soc-i2s0-dummy-dai-codec <-> mt-soc-i2s0dai-driver mapping ok
[    0.772360] soc-audio soc-audio:  mt-soc-mrgrx-dai-codec <-> mt-soc-mrgrxdai-driver mapping ok
[    0.774968] soc-audio soc-audio:  mt-soc-mrgrx-dummy-dai-codec <-> mt-soc-mrgrxdai-driver mapping ok
[    0.777399] soc-audio soc-audio:  mt-soc-codec-I2s0tx-dai <-> mt-soc-i2s0dl1dai-driver mapping ok
[    0.779971] soc-audio soc-audio:  mt-soc-codec-dl1awb-dai <-> mt-soc-dl1awbdai-driver mapping ok
[    0.782348] soc-audio soc-audio:  mt-soc-codec-voicecall-bt-dai <-> mt-soc-voicecall-btdai-driver mapping ok
[    0.784742] soc-audio soc-audio:  mt-soc-codec-voipcall-btout-dai <-> mt-soc-voipcall-btdai-out-driver mapping ok
[    0.787444] soc-audio soc-audio:  mt-soc-codec-voipcall-btin-dai <-> mt-soc-voipcall-btdai-in-driver mapping ok
[    0.790249] soc-audio soc-audio:  mt-soc-tdmrx-dai-codec <-> mt-soc-tdmrxdai-driver mapping ok
[    0.792738] soc-audio soc-audio:  mt-soc-fmmrg2tx-dummy-dai-codec <-> mt-soc-fmmrgtxdai-driver mapping ok
[    0.795475] soc-audio soc-audio:  mt-soc-codec-rx-dai2 <-> mt-soc-ul2dai-driver mapping ok
[    0.797948] soc-audio soc-audio:  mt-soc-codec-i2s0awb-dai <-> mt-soc-i2s0awbdai-driver mapping ok
[    0.800795] soc-audio soc-audio:  mt-soc-codec-pcmrx-dai <-> mt-soc-voiceextdai-driver mapping ok
[    0.803647] soc-audio soc-audio:  mt-soc-codec-voicecall-ext-bt-dai <-> mt-soc-voicecallext-btdai-driver mapping ok
[    0.806485] soc-audio soc-audio:  mt-soc-codec-voicecall-extint-dai <-> mt-soc-voiceextintdai-driver mapping ok
[    0.808904] soc-audio soc-audio:  mt-soc-codec-voicecall-extint-bt-dai <-> mt-soc-voicecallextint-btdai-driver mapping ok
[    0.811667] soc-audio soc-audio:  mt-soc-dummy-dai-codec <-> Routing-Control mapping ok
[    0.813601] soc-audio soc-audio:  mt-soc-mod2adci2s-dummy-dai-codec <-> mt-soc-mod2adci2s-driver mapping ok
[    0.815978] soc-audio soc-audio:  mt-soc-adc2awb-dummy-dai-codec <-> mt-soc-adc2awb-driver mapping ok
[    0.818724] soc-audio soc-audio:  mt-soc-io2dai-dummy-dai-codec <-> mt-soc-io2dai-driver mapping ok
[    0.820971] soc-audio soc-audio:  mt-soc-codec-hp-impedance-dai <-> mt-soc-hpimpedancedai-driver mapping ok
[    0.837557] MT_SCHED: Init complete, device major number = 248
[    0.837808] xLog: inited.
[    0.837978] logger: created 32K log 'log_ksystem'
[    0.838156] [mlog] reset format 48 %c <%ld> [%5lu .%06lu]  %6lu  %6lu  %6lu  %6lu  %6lu  %6lu  %6lu  %6lu  %6lu  %6lu  %6lu  %7lu  %7lu  %7lu  %7lu  [%6lu  %6lu  %6lu  %6lu  %6lu  %6lu  %6lu  %6lu  %6lu  %6lu  %6lu]  [%6lu  %6lu  %6lu  %6lu  %6lu  %6lu  %6lu  %6lu  %6lu  %6lu  %6lu]  [%lu]  %3ld  %6lu  %6lu  %7lu  %7lu  %7lu
[    0.838637] [mlog] reset buffer
[    0.838805] [GPIO] version: mt-gpio
[    0.840104] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[    0.840320] systracker probe
[    0.840435] systracker init done
[    0.840639] ALMK driver initialize
[    0.840669] Register the ALMK driver device
[    0.840818] Register the ALMK driver
[    0.840935] Get ALMK Device Major number (258998272)
[    0.842344] [MTK-ANT] ANT_init: mtk_stp_ANT_chrdev driver(major 197) installed.
[    0.842402] [WMT-STP-EXP][E]mtk_wcn_stp_register_event_cb(264):ERROR! mtk_wcn_stp_reg_event_cb_f cb is null
[    0.842636] [WMT-DETECT][I]wmt_detect_init:driver(major 154) installed success
[    0.842728] [SDIO-DETECT][I]sdio_detect_init:sdio_register_driver() ret=0
[    0.842775] [CONN-MD-DFT][I]conn_md_init:init message queue list succeed
[    0.842818] [CONN-MD-DFT][I]conn_md_init:init active queue list succeed
[    0.842861] [CONN-MD-DFT][I]conn_md_init:init user information list succeed
[    0.842920] [CONN_MD_DMP][I]conn_md_dmp_init:alloc memory for msg log system done, size:0x00000320
[    0.842974] [CONN-MD-DFT][I]conn_md_init:conn_md_dmp_init succeed
[    0.843155] [CONN-MD-DFT][I]conn_md_init:create conn_md_thread succeed, wakeup it
[    0.843230] [Accdet]accdet_mod_init begin!
[    0.843342] [Accdet]platform_driver_register done!
[    0.843355] [Accdet]accdet_mod_init done!
[    0.843725] [StorageLogger]add /proc/driver/storage_logger entry fail <- l="" storage_logger_init="">  PID<1>
[    0.843750] [StorageLogger]add /proc/driver/storage_logger_config entry fail <- l="" storage_logger_init="">  PID<1>
[    0.843773] [StorageLogger]add /proc/driver/usb_logger_config entry fail <- l="" storage_logger_init="">  PID<1>
[    0.843796] [StorageLogger]add /proc/driver/thermal_logger_config entry fail <- l="" storage_logger_init="">  PID<1>
[    0.843819] [StorageLogger]add /proc/driver/storage_logger entry fail <- l="" storage_logger_init="">  PID<1>
[    0.843842] [StorageLogger]add /proc/driver/fs_rectime entry fail <- l="" storage_logger_init="">  PID<1>
[    0.843863] [StorageLogger]storage_logger_init success
 <- l="" storage_logger_init="">  PID<1>
[    0.844406] [KD_CAMERA_FLASHLIGHT]flashlight_init: [flashlight_probe] start ~
[    0.844617] [KD_CAMERA_FLASHLIGHT]flashlight_probe: [flashlight_probe] start ~
[    0.844642] [KD_CAMERA_FLASHLIGHT]flashlight_probe: [flashlight_probe] major: 246, minor: 0 ~
[    0.844857] [KD_CAMERA_FLASHLIGHT]flashlight_probe: [flashlight_probe] Done ~
[    0.844904] [KD_CAMERA_FLASHLIGHT]flashlight_init: [flashlight_probe] done! ~mtk-tpd->mxt_init_4409:mxt_init
[    0.845281] mtk-tpd->synaptics_rmi4_init_3495:synatpcis register driver
[    0.845514] [tpd_em_log] :register device successfully
[    0.845771] ******** MTK WDT driver probe!! ********
[    0.845807] ******** MTK WDT register fiq ********
[    0.845847] mtk_wdt_probe : Success to request irq
[    0.845882] mtk_wdt_probe : Initialize to dual mode
[    0.845926]  mtk_wdt_mode_config  mode value=5d, tmp:2200005d,pid=1
[    0.846045] mtk_wdt_probe : done WDT_MODE(5d),MTK_WDT_NONRST_REG(0)
[    0.846085] mtk_wdt_probe : done MTK_WDT_REQ_MODE(3c0003)
[    0.846121] mtk_wdt_probe : done MTK_WDT_REQ_IRQ_EN(380001)
[    0.846189] mtk_wdt_init ok
[    0.846252] [VcoreFS] OPP 0: vcore_ao = 0x33, vcore_pdn = 0x33, ddr_khz = 1792000, axi_khz = 273000
[    0.847988] mtk-msdc: MediaTek MSDC Driver
[    0.848019] [msdc_debug_proc_init]: successfully create /proc/msdc_debug
[    0.848077] [msdc_debug_proc_init]: successfully create /proc/msdc_help
[    0.848131] [msdc_debug_proc_init]: successfully create /proc/msdc_FT
[    0.848182] [msdc_debug_proc_init]: successfully create /proc/msdc_tune
[    0.848235] [msdc_debug_proc_init]: successfully create /proc/msdc_tune_flag
[    0.848290] [msdc_debug_proc_init]: successfully create /proc/msdc_voltage_flag
[    0.848459] misc-sd: MediaTek simple SD/MMC Card Driver
[    0.848944] i2c_common device init
[    0.849203] i2c_common device probe
[    0.850778] register M4U device:0
[    0.853262] [cmb_stub] thermal_ctrl_cb null
[    0.853821] thermal_direct_mode_config(en:0x0,mode:0x1)
[    0.854408] thermal_direct_mode_config(en:0x0,mode:0x1)
[    0.854496] thermal_direct_mode_config(en:0x1,mode:0x1)
[    0.857712] thermal_direct_mode_config(en:0x0,mode:0x1)
[    0.857795] thermal_direct_mode_config(en:0x1,mode:0x1)
[    0.857967] thermal_direct_mode_config(en:0x0,mode:0x1)
[    0.858064] thermal_direct_mode_config(en:0x1,mode:0x1)
[    0.860739] 5. 6331 delay 1 ms
[    0.860782] 6331_efuse : efusevalue[0]=0x1f28
[    0.861838] 5. 6331 delay 1 ms
[    0.861874] 6331_efuse : efusevalue[1]=0xe
[    0.861922] Power/PMIC_Thermal: g_o_vts        = 0x387
[    0.861957] Power/PMIC_Thermal: g_degc_cali    = 0x32
[    0.861992] Power/PMIC_Thermal: g_adc_cali_en  = 0x1
[    0.862090] Power/PMIC_Thermal: g_o_slope      = 0x0
[    0.862128] Power/PMIC_Thermal: g_o_slope_sign = 0x0
[    0.862163] Power/PMIC_Thermal: g_id           = 0x0
[    0.862703] [tsbuck_read_6332_efuse] start
[    0.862793] 5. polling Reg[0x61A][0]=0x0
[    0.863824] 5. 6332 delay 1 ms
[    0.863862] 6332_efuse : efusevalue[0]=0xc465
[    0.863919] 5. polling Reg[0x61A][0]=0x0
[    0.864947] 5. 6332 delay 1 ms
[    0.864982] 6332_efuse : efusevalue[1]=0x1
[    0.865030] Power/BUCK_Thermal: g_o_vts        = 0x388
[    0.865065] Power/BUCK_Thermal: g_degc_cali    = 0x32
[    0.865099] Power/BUCK_Thermal: g_adc_cali_en  = 0x1
[    0.865132] Power/BUCK_Thermal: g_o_slope      = 0x0
[    0.865167] Power/BUCK_Thermal: g_o_slope_sign = 0x0
[    0.865201] Power/BUCK_Thermal: g_id           = 0x0
[    0.865245] [Power/PMIC_Thermal] [Thermal calibration] SLOPE1=100000 SLOPE2=-171 INTERCEPT=437865, Vbe = -706000
[    0.867764] No Linux framebuffer (fbdev) device is registered!
Check you have a framebuffer driver compiled into your kernel
and that it is enabled on the cmdline.
[    0.868114] drop_monitor: Initializing network drop monitor service
[    0.868207] Mirror/redirect action on
[    0.868222] Failed to load ipt action
[    0.868257] u32 classifier
[    0.868269]     Performance counters on
[    0.868280]     input device check on
[    0.868291]     Actions configured
[    0.868309] Netfilter messages via NETLINK v0.30.
[    0.868337] nfnl_acct: registering with nfnetlink.
[    0.868411] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    0.869015] ctnetlink v0.93: registering with nfnetlink.
[    0.869099] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[    0.869113] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[    0.869357] xt_time: kernel timezone is -0000
[    0.869595] ipip: IPv4 over IPv4 tunneling driver
[    0.870538] ip_tables: (C) 2000-2006 Netfilter Core Team
[    0.870781] arp_tables: (C) 2002 David S. Miller
[    0.870804] TCP: cubic registered
[    0.870817] Initializing XFRM netlink socket
[    0.872744] mip6: Mobile IPv6
[    0.872807] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    0.873124] sit: IPv6 over IPv4 tunneling driver
[    0.874644] Bridge firewalling registered
[    0.874894] Bluetooth: RFCOMM TTY layer initialized
[    0.874943] Bluetooth: RFCOMM socket layer initialized
[    0.874960] Bluetooth: RFCOMM ver 1.11
[    0.874978] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    0.874994] Bluetooth: BNEP filters: protocol multicast
[    0.875021] Bluetooth: BNEP socket layer initialized
[    0.875037] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    0.875063] Bluetooth: HIDP socket layer initialized
[    0.875078] 8021q: 802.1Q VLAN Support v1.8
[    0.875152] Key type dns_resolver registered
[    0.876079] VFP support v0.3: implementor 41 architecture 3 part 30 variant e rev 0
[    0.876117] ThumbEE CPU extension supported.
[    0.876150] Registering SWP/SWPB emulation handler
[    0.876362] mtk-uart.0: ttyMT0 at MMIO 0x11002000 (irq = 115, base_baud = 1625000) is a MTK UART
[    0.876677] [UART 0] create[ 0] e0804000 (1024) ;[ 1] e0805000 (1024) ;
[    0.876935] mtk-uart.1: ttyMT1 at MMIO 0x11003000 (irq = 116, base_baud = 1625000) is a MTK UART
[    0.877221] [UART 1] create[ 2] e0806000 (8192) ;[ 3] e0808000 (8192) ;
[    0.877522] mtk-uart.2: ttyMT2 at MMIO 0x11004000 (irq = 117, base_baud = 1625000) is a MTK UART
[    0.877817] [UART 2] create[ 4] e080a000 (8192) ;[ 5] e080c000 (8192) ;
[    0.878111] mtk-uart.3: ttyMT3 at MMIO 0x11005000 (irq = 118, base_baud = 1625000) is a MTK UART
[    0.878410] [UART 3] not support VFF, Cancel alloc
[    0.878470] [mt_board_init]: sn_kobj finished probe, retval=0
[    0.878631] [GPIO] Registering GPIO device
[    0.878827] [mt_board_init]: gpio_dev finished probe, retval=0
[    0.879093] [mt_board_init]: fh_dev finished probe, retval=0
[    0.879268] kpd: init_keymap_state done: ffff ffff ffff ffff ff!
[    0.879538] input: mtk-kpd as /devices/platform/mtk-kpd/input/input0
[    0.879973] [mt_board_init]: kpd_pdev finished probe, retval=0
[    0.890960] functsu6721_muic_probe:******client->adapter 0xdeccf400, client->addr 0x25
[    0.895200] [S24CAM_CAL] Attach I2C
[    0.895237] [CAM_CAL] g_pstI2Cclient->addr = 0x      54
[    0.895464] [S24CAM_CAL] Attached!!
[    0.895687] [mt_board_init]: mt_device_i2c[0] finished probe, retval=0
[    0.905910] hw always power on
[    0.925673] [da9210_hw_init] [0x0]=0x80, [0x58]=0x44, [0x59]=0x4, [0x5A]=0x54, [0x5D]=0x49, [0xD1]=0xf3, [0xD2]=0x13, [0xD6]=0x64, [0xD8]=0x50, [0xD9]=0xa8
[    0.925742] [da9210] page 0,1: [0x0]=0x80 [0x50]=0x9 [0x51]=0x0 [0x52]=0xf [0x53]=0x3 [0x54]=0x0 [0x55]=0x0 [0x56]=0x13 [0x57]=0x0 [0x58]=0x44 [0x59]=0x4 [0x5a]=0x54 [0x5b]=0xe [0x5c]=0x0 [0x5d]=0x49 [0xd0]=0xb [0xd1]=0xf3 [0xd2]=0x13 [0xd3]=0x0 [0xd4]=0x46 [0xd5]=0x46 [0xd6]=0x64 [0xd7]=0x46 [0xd8]=0x50 [0xd9]=0xa8
[    0.938484] [da9210] page 2,3: [0x5]=0xd9 [0x6]=0x80 [0x43]=0x12 [0x44]=0x0 [0x45]=0x0 [0x46]=0xc0 [0x47]=0x1 [0x48]=0x0 [0x49]=0x0 [0x4a]=0x0 [0x4b]=0x0 [0x4c]=0x0 [0x4d]=0x0 [0x4e]=0x0 [0x4f]=0x0
[    0.960325] [tps6128x] [0x0]=0x3 [0x1]=0x1 [0x2]=0x6 [0x3]=0xb [0x4]=0x1f [0x5]=0x20
[    0.965106] [tps6128x] [0x0]=0x3 [0x1]=0x1 [0x2]=0x6 [0x3]=0xb [0x4]=0x1f [0x5]=0x20
[    0.968213] [mt_board_init]: mt_device_i2c[1] finished probe, retval=0
[    0.978441] same power domain with i2c0
[    0.978923] mtk-tpd->mxt_probe_4204:enter atmel probe function
[    0.978983] mtk-tpd->hw_power_onoff_88:power devices 1
[    1.192361] [mt-i2c]ERROR,454: id=2,addr: 4a, transfer error
[    1.192403] [mt-i2c]ERROR,460: I2C_ACKERR
[    1.192464] atmel_mxt_ts 2-004a: __mxt_read_reg: I2C retry 1
[    1.192511] mxt_dump_gpio:SDA:1 SCL:1 IRQ:0 RST:1
[    1.332086] mxt_reset_device:reset value success
[    1.362339] [mt-i2c]ERROR,454: id=2,addr: 4a, transfer error
[    1.362385] [mt-i2c]ERROR,460: I2C_ACKERR
[    1.362446] atmel_mxt_ts 2-004a: __mxt_read_reg: I2C retry 2
[    1.362493] mxt_dump_gpio:SDA:1 SCL:1 IRQ:0 RST:1
[    1.502091] mxt_reset_device:reset value success
[    1.532335] [mt-i2c]ERROR,454: id=2,addr: 4a, transfer error
[    1.532375] [mt-i2c]ERROR,460: I2C_ACKERR
[    1.532432] atmel_mxt_ts 2-004a: __mxt_read_reg: I2C retry 3
[    1.532477] mxt_dump_gpio:SDA:1 SCL:1 IRQ:0 RST:1
[    1.672085] mxt_reset_device:reset value success
[    1.702095] atmel_mxt_ts 2-004a: __mxt_read_reg: I2C read over retry limit
[    1.702391] [mt-i2c]ERROR,454: id=2,addr: 4a, transfer error
[    1.702430] [mt-i2c]ERROR,460: I2C_ACKERR
[    1.702486] atmel_mxt_ts 2-004a: __mxt_read_reg: I2C retry 1
[    1.702530] mxt_dump_gpio:SDA:1 SCL:1 IRQ:0 RST:1
[    1.842083] mxt_reset_device:reset value success
[    1.872333] [mt-i2c]ERROR,454: id=2,addr: 4a, transfer error
[    1.872374] [mt-i2c]ERROR,460: I2C_ACKERR
[    1.872431] atmel_mxt_ts 2-004a: __mxt_read_reg: I2C retry 2
[    1.872476] mxt_dump_gpio:SDA:1 SCL:1 IRQ:0 RST:1
[    2.012079] mxt_reset_device:reset value success
[    2.042346] [mt-i2c]ERROR,454: id=2,addr: 4a, transfer error
[    2.042388] [mt-i2c]ERROR,460: I2C_ACKERR
[    2.042446] atmel_mxt_ts 2-004a: __mxt_read_reg: I2C retry 3
[    2.042491] mxt_dump_gpio:SDA:1 SCL:1 IRQ:0 RST:1
[    2.182083] mxt_reset_device:reset value success
[    2.212087] atmel_mxt_ts 2-004a: __mxt_read_reg: I2C read over retry limit
[    2.212143] atmel_mxt_ts 2-004a: Info Block CRC error calculated=0x000000 read=0x000000
[    2.212212] atmel_mxt_ts: probe of 2-004a failed with error -5
[    2.212370] mtk-tpd->synaptics_rmi4_probe_3000:enter rmi4 probe
[    2.212416] mtk-tpd->hw_power_onoff_88:power devices 1
[    2.397839] mtk-tpd->synaptics_rmi4_set_params_2345:x_max[1152],y_max[1920]
[    2.398146] input: mtk-tpd as /devices/platform/mt-i2c.2/i2c-2/2-0020/input/input1
[    2.398938] mtk-tpd->hw_irq_enable_189:TPD wake up
[    2.399571] mtk_tpd: tpd_misc_device register failed
[    2.399614] mtk-tpd->synaptics_rmi4_probe_3159:synaptics probe success
[    2.399687] [mt_board_init]: mt_device_i2c[2] finished probe, retval=0
[    2.400010] mtk-tpd 2-0020: fwu_scan_pdt: Found F34
[    2.400399] mtk-tpd 2-0020: fwu_scan_pdt: Found F01
[    2.400783] mtk-tpd 2-0020: fwu_scan_pdt: Found F12
[    2.401169] mtk-tpd 2-0020: synaptics_rmi4_fwu_init: F01 product info: 0x0000 0x0000
[    2.401226] mtk-tpd 2-0020: synaptics_rmi4_fwu_init: F01 product ID: 75TPKW
[    2.409916] hw always power on
[    2.415748] bl-lm3697 3-0036: TI backlight driver registerred OK!
[    2.415867] +++isl_sensor_probe
[    2.431119] isl_sensor_probe,i2c client address is 0x44,chip id is 0x7d
[    2.431525] input: isl29125 as /devices/platform/mt-i2c.3/i2c-3/3-0044/input/input2
[    2.435487] input: pa122 as /devices/platform/mt-i2c.3/i2c-3/3-001e/input/input3
[    2.437528] txc_probe: probe ok!!, client addr is 0x1e
[    2.612385] compass data=72,72
[    2.753544] inv_mpu_probe i2c success
[    2.754574] mpu7400 is ready to go!
[    2.754705] [MOTOR] motor_i2c_probe
[    2.754744] [drv2605_motor_hw_init] enter
[    2.758145] [motor] check_dev_id this is DRV2605
[    2.761079] [drv2605_motor_hw_init] Calibration wait times:0
[    2.761577] [drv2605_motor_hw_init] auto calibration success
[    2.762812] [drv2605_motor_hw_init]  exit
[    2.762847] [MOTOR] motor_i2c_probe
[    2.762911] [mt_board_init]: mt_device_i2c[3] finished probe, retval=0
[    2.763372] msdc0 -> msdc drving <- :="" l="" msdc_init_hw=""> PID<0x1>
[    2.763600] msdc LDO<6> power on<3300>
[    2.812114] msdc: 0,mmc_schedule_delayed_work ret= 1
[    2.812155] [msdc_drv_probe]: msdc0, pll[0xf020925c][bit0~1=0x1]=0x80000001, pll[0xf0209250][bit0=0x1]=0x111, mux[0xf0000070][bit15,23,31=0x1]=0x82060201, clk[0xf0003018][bit13=msdc0, bit14=msdc1]=0x2ff7dffd
[    2.812252] [mt_board_init]: msdc finished probe, retval=0
[    2.812620] msdc3 -> msdc drving <- :="" l="" msdc_init_hw=""> PID<0x1>
[    2.812695] enter mtk_wcn_cmb_sdio_request_eirq
[    2.812710] sdio_irq_enable_flag:0
[    2.812726] exit mtk_wcn_cmb_sdio_request_eirq
[    2.812745] mtk_wcn_cmb_sdio_register_pm (0xc062c444, 0xdf0a7400)
[    2.861369] sd card rocr <0x0>
[    2.862098] msdc: 1,mmc_schedule_delayed_work ret= 1
[    2.862135] [msdc_drv_probe]: msdc3, pll[0xf020925c][bit0~1=0x1]=0x80000001, pll[0xf0209250][bit0=0x1]=0x111, mux[0xf0000070][bit15,23,31=0x1]=0x82060201, clk[0xf0003018][bit13=msdc0, bit14=msdc1]=0x2ff6dffd
[    2.862232] [mt_board_init]: msdc finished probe, retval=0
[    2.862427] [mt_board_init]: mtk_device_btif, retval=0
!register MTK_SMI device
[    2.863078] [mt_board_init]: mtk_smi_dev, retval=0
!register CMDQ device: 0
[    2.865394] [mt_board_init]: mtk_cmdq_dev, retval=0
![mt_board_init]: disp_device, retval=0
!register MJC device: 0
[    2.866014] [DT]FB start: 0xbda00000 end: 0xbfffffff
[    2.866208] mtkfb_probe:get FB MEM REG
[    2.866244] mtkfb_probe: fb_pa = 0x00000000bda00000
[    2.866922] disphal_allocate_fb, pa=0x00000000bda00000, va=0xe1000000
[    2.867064] [DISPHAL] FB MVA is 0xBDA00000 PA is 0x00000000bda00000
[    2.867106] mtkfb_find_lcm_driver, hx8399_fhd_dsi_vdo_sharp
[    2.867506] [DFO] LCM_FAKE_WIDTH=0, LCM_FAKE_HEIGHT=0
[    2.867618] ded34000: 80008001 20000034 00000004 0142374c
[    2.867784] [PWM] ddp_pwm_power_on: 12

[    2.867836] DSI_BackupRegisters VM_CMD_EN 1 TS_VFP_EN 1
[    2.867908] [GAMMA] disp_gamma_write_lut_reg: gamma table [0] not initialized
[    2.867953] [GAMMA] disp_ccorr_write_coef_reg: [0] not initialized
[    2.867989] ddp_bypass_od
[    2.868042] [PWM] disp_pwm_init : CLK_CFG_1 0x81818100 => 0x81818100
[    2.868058] [PWM] disp_pwm_init : PWM config data (0,5)
[    2.868752] [DDP/IRQ]error:Try to unregister callback function with was not registered. module=4 cb=0xC065B498
[    2.869146] [mt_board_init]: mt6575_device_fb, retval=0
![mt_board_init]: mt65xx_leds_device, retval=0
!device LEDS register
[    2.882878] [mt_board_init]: auxadc_device, retval=0
!
[    2.883049] [Accdet]accdet_probe begin!
[    2.883554] input: ACCDET as /devices/virtual/input/input4
[    2.883769] [Accdet]kpd_accdet_dev register : success!!
[    2.884178]  accdet:sendKeyEvent wait
[    2.884191] [Accdet]accdet_probe : ACCDET_INIT
[    2.884383] [Accdet]accdet hardware init
[    2.884429] [Accdet]accdet TOP_CKPDN=0xfefa!
[    2.884460] ACCDET reset : reset start!!

[    2.884493] ACCDET reset function test: reset finished!!

[    2.884602]  ACCDET_ADC_REG =2640
[    2.884636]  ACCDET_EINT_NV =800
[    2.884670]  ACCDET_RSV =290
[    2.884779] [Accdet]accdet interrupt happen:[Plug_out]current AB = 3
[    2.884830] [Accdet]check_cable_type: ACCDET_IRQ_STS = 0x8000
[    2.884867] [Accdet]PLUG_OUT state not change!
[    2.884899] [Accdet] do not send plug out event in plug out
[    2.884954] [Accdet]check_cable_type:Clear interrupt:Done[0x8000]!
[    2.884996] [Accdet]cable type:[No_device], status switch:[Plug_out]->[Plug_out]
[    2.885040]  [accdet] set state in cable_type  status
[    2.885077] [Accdet]accdet_setup_eint
[    2.886361] [Accdet]accdet_probe done!
[    2.886405] [mt_board_init]: accdet_device, retval=0
!platform_device_accdet_register done!
[    2.886461] mtu3d_dev register
[    2.892266] musb-hdrc musb-hdrc: USB Peripheral mode controller at f1270000 using PIO, IRQ 146
[    2.892296] mt_board_init(2439): register xhci device
[    2.905837] [mt_board_init]: mtk_tpd_dev, retval=0
![mt_board_init]: dummychar_device, retval=0
!PMEM start: 0x12345678 size: 0x0
[    2.906175] pmem_multimedia: 1 init
[    2.906606] android_pmem: probe of android_pmem.1 failed with error -1
[    2.906720] [mt_board_init]: pmem_multimedia_device, retval=0
![Power/spower] sptab max tab:19/37
[    2.906887] [Power/spower] sptab max tab:112/124
[    2.906925] [Power/spower] sptab max tab:31/44
[    2.906961] [Power/spower] sptab max tab:112/183
[    2.910231] [mt_board_init]: cpufreq_pdev, retval=0
![mt_board_init]: gpufreq_pdev, retval=0
![mt_board_init]: thermal_pdev, retval=0
![mt_board_init]: mtk_therm_mon_pdev, retval=0
![mt_board_init]: ptp_pdev, retval=0
![mt_board_init]: spm_mcdi_pdev, retval=0
![mt_board_init]: sensor_dev, retval=0
![mt_board_init]: sensor_dev_bus2, retval=0
![mt_board_init]: actuator_dev, retval=0
![mt_board_init]: actuator_dev2, retval=0
!kk:+ ISP_probe
[    2.913398] kk:- ISP_probe
[    2.913439] [mt_board_init]: mt_isp_dev, retval=0
![mt_board_init]: mt_rfkill_device, retval=0
![mt_board_init]: camera_sysram_dev, retval=0
![mt_board_init]: mt3326_device_gps, retval=0
![mt_board_init]: mtk_nfc_6605_dev, retval=0
![mt_board_init]: mt_device_wifi, retval=0
![sec] sec_init (0)
[    2.914966] [ccci/mcd](0)modem CLDMA module init
[    2.915029] [ccci/cor](0)register modem 184
[    2.915063] [ccci/mcd](1)CLDMA modem is initializing
[    2.919761] mmc0: BKOPS_EN bit is not set
[    2.921388] [CONN-MD-DFT][W]conn_md_add_user:uid (0x00000005) is added to user list successfully
[    2.923123] [mmc_select_hs400]: switch to HS400 speed mode, err=0
[    2.923574] mmc0: new MMC card at address 0001
[    2.923660] l_reserve = 0x0
[    2.923758] mmcblk0: mmc0:0001 016GE2 14.6 GiB
[    2.923842] mmcblk0boot0: mmc0:0001 016GE2 partition 1 4.00 MiB
[    2.923963] mmcblk0boot1: mmc0:0001 016GE2 partition 2 4.00 MiB
[    2.924146] mmcblk0rpmb: mmc0:0001 016GE2 partition 3 4.00 MiB
[    2.924153] [mmc_blk_probe]: mmcblk0 by manufacturer settings, quirks=0x1000
[    2.924328] [ccci/cor](1)CH0 ports:ccci_ctrl(0/1)
[    2.924343] [ccci/cor](1)CH2 ports:ccci_sys(2/3)
[    2.924356] [ccci/cor](1)CH4 ports:ccci_aud(4/5)
[    2.924368] [ccci/cor](1)CH6 ports:ccci_md_log_ctrl(6/8)
[    2.924380] [ccci/cor](1)CH10 ports:ttyC0(10/12)
[    2.924392] [ccci/cor](1)CH14 ports:ccci_fs(14/15)
[    2.924404] [ccci/cor](1)CH20 ports:ccmni0(20/22)
[    2.924415] [ccci/cor](1)CH24 ports:ccmni1(24/26)
[    2.924427] [ccci/cor](1)CH28 ports:ccmni2(28/30)
[    2.924439] [ccci/cor](1)CH32 ports:ccci_rpc(32/33)
[    2.924451] [ccci/cor](1)CH34 ports:ccci_ipc_1220_0(34/36) ccci_ipc_2(34/36) ccci_ipc_3(34/36)
[    2.924473] [ccci/cor](1)CH38 ports:ttyC2(38/40)
[    2.924484] [ccci/cor](1)CH42 ports:ttyC1(42/43)
[    2.924495] [ccci/cor](1)CH50 ports:eemcs_it(50/51)
[    2.924507] [ccci/cor](1)CH53 ports:ccci_imsv(53/52)
[    2.924518] [ccci/cor](1)CH55 ports:ccci_imsc(55/54)
[    2.924530] [ccci/cor](1)CH57 ports:ccci_imsa(57/56)
[    2.924541] [ccci/cor](1)CH59 ports:ccci_imsdc(59/58)
[    2.924553] [ccci/cor](1)CH60 ports:ttyC3(60/61)
[    2.924564] [ccci/cor](1)CH62 ports:eemcs_lb_it(62/63)
[    2.924575] [ccci/cor](1)CH67 ports:ccci_poll(67/68)
[    2.924587] [ccci/cor](1)CH69 ports:ccci_monitor(69/69)
[    2.924599] [ccci/cor](1)CH70 ports:ccci_ioctl0(70/70) ccci_ioctl1(70/70) ccci_ioctl2(70/70) ccci_ioctl3(70/70) ccci_ioctl4(70/70)
[    2.925462] [ccci/cor](1)4GB mode disabled, invalid_map=30000000
[    2.925475] [ccci/cor](1)MD Smem remap:[2e000000]->[40000000](3533312f:3d3b3937)
[    2.925486] [ccci/cor](1)AP to MD share memory offset 0x2E000000
[    2.925496] [ccci/cor](1)MD ROM mem remap:[2a000000]->[0](3f2f2d2b:47454341)
[    2.925601]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17
[    2.925622] set irq 88 to cpu 0
[    2.925627] reg 0xf0221858 = 0x01010100
[    2.925632] set irq 88 to cpu 0
[    2.925636] d_partition==[ = 0x01010101
[    2.925643] add_partition==[mmcblk0:p1]==start = 1024,size = 6144
[    2.925649] cpu_xgpt_register_timer:mtk_cpuxgpt0 register irq (88) ok
[    2.925651] set irq 89 to cpu 0
[    2.925653] reg 0xf0221858 = 0x01010001
[    2.925655] set irq 89 to cpu 1
[    2.925657] reg 0xf0221858 = 0x01010201
[    2.925664] cpu_xgpt_register_timer:mtk_cpuxgpt1 register irq (89) ok
[    2.925666] set irq 90 to cpu 0
[    2.925668] reg 0xf0221858 = 0x01000201
[    2.925670] set irq 90 to cpu 2
[    2.925672] reg 0xf0221858 = 0x01040201
[    2.925679] cpu_xgpt_register_timer:mtk_cpuxgpt2 register irq (90) ok
[    2.925681] set irq 91 to cpu 0
[    2.925683] reg 0xf0221858 = 0x00040201
[    2.925685] set irq 91 to cpu 3
[    2.925687] reg 0xf0221858 = 0x08040201
[    2.925693] cpu_xgpt_register_timer:mtk_cpuxgpt3 register irq (91) ok
[    2.925698] set irq 92 to cpu 0
[    2.925703] reg 0xf022185c = 0x01010100
[    2.925707] set irq 92 to cpu 4
[    2.925712] reg 0xf022185c = 0x01010110
[    2.925718] cpu_xgpt_register_timer:mtk_cpuxgpt4 register irq (92) ok
[    2.925720] set irq 93 to cpu 0
[    2.925722] reg 0xf022185c = 0x01010010
[    2.925724] set irq 93 to cpu 5
[    2.925726] reg 0xf022185c = 0x01012010
[    2.925736] cpu_xgpt_register_timer:mtk_cpuxgpt5 register irq (93) ok
[    2.925740] set irq 94 to cpu 0
[    2.925745] reg 0xf022185c = 0x01002010
[    2.925749] set irq 94 to cpu 6
[    2.925754] reg 0xf022185c = 0x01402010
[    2.925760] cpu_xgpt_register_timer:mtk_cpuxgpt6 register irq (94) ok
[    2.925762] set irq 95 to cpu 0
[    2.925764] reg 0xf022185c = 0x00402010
[    2.925767] set irq 95 to cpu 7
[    2.925769] reg 0xf022185c = 0x80402010
[    2.925776] cpu_xgpt_register_timer:mtk_cpuxgpt7 register irq (95) ok
[    2.925787] mt_get_chip_sw_ver: 1
[    2.925846] TuxOnIce 3.3 (http://tuxonice.net)
[    2.926128] add_partition==[mmcblk0:p2]==start = 7168,size = 10240
[    2.926219] [HIB/TOI] [toi_start_anything()]hibernate_or_resume(0x0000000a), resume_file=""
[    2.926239] add_partition==[mmcblk0:p3]==start = 17408,size = 20480
[    2.926277] [HIB/TOI] [try_to_open_resume_device()]commandline=""
[    2.926292] add_partition==[mmcblk0:p4]==start = 37888,size = 20480
[    2.926320] Scanning swap devices for TuxOnIce signature...
[    2.926344] add_partition==[mmcblk0:p5]==start = 58368,size = 512
[    2.926410] add_partition==[mmcblk0:p6]==start = 58880,size = 768
[    2.926469] add_partition==[mmcblk0:p7]==start = 59648,size = 32768
[    2.926531] add_partition==[mmcblk0:p8]==start = 92416,size = 32768
[    2.926591] add_partition==[mmcblk0:p9]==start = 125184,size = 12288
[    2.926654] add_partition==[mmcblk0:p10]==start = 137472,size = 1024
[    2.926712] add_partition==[mmcblk0:p11]==start = 138496,size = 16384
[    2.926771] add_partition==[mmcblk0:p12]==start = 154880,size = 20480
[    2.926830] add_partition==[mmcblk0:p13]==start = 175360,size = 21248
[    2.926889] add_partition==[mmcblk0:p14]==start = 196608,size = 4227072
[    2.926950] add_partition==[mmcblk0:p15]==start = 4423680,size = 1441792
[    2.927010] add_partition==[mmcblk0:p16]==start = 5865472,size = 24878080
[    2.927068] add_partition==[mmcblk0:p17]==start = 30743552,size = 32768
[    2.927814]  mmcblk0boot1: unknown partition table
[    2.928393]  mmcblk0boot0: unknown partition table
[    2.928448] mmc_blk_probe: [pro_info] start sect = 1024, nr_sects = 6144
[    2.928456] mmc_blk_probe: [system] start sect = 196608, nr_sects = 4227072
[    2.928462] mmc_blk_probe: [custom] start sect = 154880, nr_sects = 20480
[    2.928686] [mmc_attach_mmc]: cache_size=512KB, cache_ctrl=0
[    2.945117] TuxOnIce scan: No image found.
[    2.945130] Scanning swap devices for TuxOnIce signature...
[    2.961281] TuxOnIce scan: No image found.
[    2.961341] TuxOnIce: No matching enabled allocator found. Resuming disabled.
[    2.964332] Key type encrypted registered
[    2.966691] AppArmor: AppArmor sha1 policy hashing enabled
[    2.966862] file system registered
[    2.967279] android_usb gadget: Mass Storage Function, version: 2009/09/11
[    2.967284] android_usb gadget: Number of LUNs=1
[    2.967289]  lun0: LUN: removable file: (no medium)
[    2.967364] android_usb gadget: android_usb ready
[    2.967436] mt-rtc mt-rtc: setting system clock to 2015-09-03 09:17:07 UTC (1441271827)
[    2.967443] [LMK]total_low_ratio[4] - totalram_pages[484355] - totalhigh_pages[362493]
[    2.967654] input: gpio-keys as /devices/platform/gpio-keys.0/input/input5
[    2.968862] wd api_size=19
[    2.968870] p[1]=c04d9f24
[    2.968877] p[2]=c04d9ef8
[    2.968883] p[3]=c04d9ed4
[    2.968889] p[4]=c04d9eb0
[    2.968894] p[5]=c04d9e68
[    2.968901] p[6]=c04d9e24
[    2.968906] p[7]=c04d9d6c
[    2.968912] p[8]=c04d9e48
[    2.968918] p[9]=c04da0ac
[    2.968924] p[10]=c04d9e04
[    2.968930] p[11]=c04d9de8
[    2.968936] p[12]=c04d9dcc
[    2.968942] p[13]=c04d9db0
[    2.968948] p[14]=c04d9d94
[    2.968954] p[15]=c04da020
[    2.968960] p[16]=c04d9fb8
[    2.968966] p[17]=c04da080
[    2.968972] p[18]=c04d9f44
[    2.968978] wd_api init ok
[    2.969256] [WDK] WDT start kicker  done
[    2.969265] [WDK] fwq start_kicker_thread_with_default_setting done
[    2.969279] [WDK] Initialize proc
[    2.969288] [WDK] init_wk done
[    2.969694] ALSA device list:
[    2.969698]   #0: mt-snd-card
[    2.969820] SLEEP_EN = 0x1
[    2.969839] Linux default SW Flow Control
[    2.970008] Freeing unused kernel memory: 532K (c0da4000 - c0e29000)
[    2.970013] Write protecting the kernel text section c0008000 - c0ccd000
[    3.205824] initrd: checking filesystem integrity for the userdata partition
[    3.207824] EXT3-fs (mmcblk0p16): error: couldn't mount because of unsupported optional features (40)
[    3.208160] EXT4-fs (mmcblk0p16): couldn't mount as ext2 due to feature incompatibilities
[    3.215856] EXT4-fs (mmcblk0p16): recovery complete
[    3.216312] EXT4-fs (mmcblk0p16): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[    3.230212] initrd: checking filesystem for userdata took (including e2fsck) 0 seconds
[    3.241006] initrd: mounting /dev/disk/by-partlabel/userdata
[    3.242201] EXT3-fs (mmcblk0p16): error: unrecognized mount option "discard" or missing value
[    3.242545] EXT4-fs (mmcblk0p16): Mount option "data=journal" incompatible with ext2
[    3.242820] EXT4-fs: Warning: mounting with data=journal disables delayed allocation and O_DIRECT support!
[    3.245007] EXT4-fs (mmcblk0p16): mounted filesystem with journalled data mode. Opts: discard,data=journal
[    3.246970] initrd: boot mode: ubuntu
[    3.248469] EXT3-fs (mmcblk0p14): error: couldn't mount because of unsupported optional features (40)
[    3.248783] EXT4-fs (mmcblk0p14): couldn't mount as ext2 due to feature incompatibilities
[    3.250570] EXT4-fs (mmcblk0p14): mounted filesystem with ordered data mode. Opts: (null)
[    3.250714] initrd: mounting system.img (user mode)
[    3.252208] EXT4-fs (mmcblk0p14): re-mounted. Opts: data=ordered
[    3.267137] initrd: mounting device image as ro
[    3.270466] EXT3-fs (loop0): error: couldn't mount because of unsupported optional features (40)
[    3.270631] EXT4-fs (loop0): couldn't mount as ext2 due to feature incompatibilities
[    3.273827] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
[    3.278361] initrd: device is arale
[    3.378302] initrd: checking fstab /root/var/lib/lxc/android/rootfs/fstab* for additional mount points
[    3.394637] initrd: checking mount label cache
[    3.395133] initrd: mounting /dev/disk/by-partlabel/cache as /root/android//cache
[    3.400551] EXT4-fs (mmcblk0p15): recovery complete
[    3.401001] EXT4-fs (mmcblk0p15): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
[    3.402958] initrd: mounting /root/var/lib/lxc/android/system.img as /root/android/system
[    3.430270] Adding 32764k swap on /root/userdata/SWAP.img.  Priority:-1 extents:1 across:32764k SS
[    3.473681] SLEEP_EN = 0x1
[    3.473708] Linux default SW Flow Control
[    3.473740] Linux default SW Flow Control
[    4.143633] init: ubuntu-location-provider-here-after-wizard main process (708) killed by TERM signal
[    4.178444] init: bluetooth-touch main process (715) terminated with status 1
[    4.610662] init: could not import file 'init.xlog.rc' from '/init.rc'
[    4.611129] init: /init.modem.rc: 71: ignored duplicate definition of service 'md_minilog_util'
[    4.611171] init: /init.modem.rc: 99: ignored duplicate definition of service 'pppd_gprs'
[    4.611360] init (712): /proc/712/oom_adj is deprecated, please use /proc/712/oom_score_adj instead.
[    4.631769] init: apport-noui (/var/crash/_usr_bin_media-hub-server.32011.crash) main process (691) terminated with status 1
[    4.672634] init: /dev/hw_random not found
[    4.672794] init: cannot open '/initlogo.rle'
[    4.674579] init: using deprecated syntax for specifying property 'ro.serialno', use ${name} instead
[    4.674639] init: using deprecated syntax for specifying property 'sys.usb.vid', use ${name} instead
[    4.758151] [Ker_PM][request_suspend_state]wakeup (3->0) at 4696133537 (2015-09-03 09:17:08.564219230 UTC)
[    4.767777] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: commit=1,noauto_da_alloc
[    4.775599] EXT4-fs (mmcblk0p3): recovery complete
[    4.776539] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: commit=1,nodelalloc,noauto_da_alloc
[    4.787320] EXT4-fs (mmcblk0p4): recovery complete
[    4.788385] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: commit=1,nodelalloc,noauto_da_alloc
[    4.788798] EXT3-fs (mmcblk0p2): error: can't find ext3 filesystem on dev mmcblk0p2.
[    4.796606] [MD32] md32_log_buf_addr = 1308
[    4.796645] [MD32] md32_log_start_idx_addr = 1738
[    4.796665] [MD32] md32_log_end_idx_addr = 1730
[    4.796685] [MD32] md32_log_lock_addr = 1734
[    4.796706] [MD32] md32_log_buf_len_addr = 172c
[    4.796727] [MD32] enable_md32_mobile_log_addr = 1708
[    4.796780] [vcore dvfs]md32 ipi handler is called
[    4.796935] [WDK] mode=0 interval=20 timeout=30 enable =32
[    4.796943] fwq2 before set wdt_sys_val =0
[    4.806951] after set wdt_sys_val =0,wdt_sys_val=88000000
[    4.806958] [WDK] use reboot mod
[    4.808923] init: init: mknod failedinit: using deprecated syntax for specifying property 'sys.usb.vid', use ${name} instead
[    4.816282] init: /dev/hw_random not found
[    4.821601] [mtk_net][sched]dev_activate dev = lo
[    4.826462] init: service 'ueventd' still running, return directly
[    4.826888] init: service 'upstart-watcher' still running, return directly
[    4.827706] init: cannot find '/system/bin/ext_mdinit', disabling 'ext_mdinit'
[    4.828176] init: service 'drvbd' still running, return directly
[    4.833878] init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
[    4.833907] init: powerctl: cannot expand '${sys.powerctl}'
[    4.833936] init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${sys.sysctl.extra_free_kbytes}'
[    4.833954] init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sys/vm/extra_free_kbytes'
[    4.833985] init: using deprecated syntax for specifying property 'persist.sys.usb.config', use ${name} instead
[    4.834111] android_usb: already disabled
[    4.834431] init: using deprecated syntax for specifying property 'sys.usb.vid', use ${name} instead
[    4.834531] mtp_bind_config
[    4.834540] android_usb gadget: adding 'mtp'/ded03e00 to config 'android'/c0ea6e60
[    4.834544] mtp_function_bind dev: ded03e00
[    4.834560] /root/tangxi/kernel/drivers/usb/gadget/f_adb.c adb_bind_config 914
[    4.834563] [ADB] SS ADB DESCS!!
[    4.834568] android_usb gadget: adding 'adb'/dee5c480 to config 'android'/c0ea6e60
[    4.834595] android_usb gadget: cfg 1/c0ea6e60 speeds: super high full
[    4.834618] init: cannot find '/sbin/adbd', disabling 'adbd'
[    4.834631] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
[    4.838295] binder: 809:809 transaction failed 29189, size 0-0
[    4.882871] [WMT-DETECT][I]wmt_detect_open:open major 154 minor 0 (pid 847)
[    4.882956] [WMT-DETECT][I]wmt_detect_unlocked_ioctl:cmd (-2147191034),arg(1784146912)
[    4.882962] [WMT-DETECT][I]wmt_detect_ext_chip_pwr_on:++
[    4.882966] [WMT-DETECT][I]wmt_detect_dump_pin_conf:[WMT-DETECT]=>dump wmt pin configuration start<=
[    4.882970] [WMT-DETECT][I]wmt_detect_dump_pin_conf:LDO(not defined)
[    4.882974] [WMT-DETECT][I]wmt_detect_dump_pin_conf:PMU(GPIO-2147483473)
[    4.882978] [WMT-DETECT][I]wmt_detect_dump_pin_conf:PMUV28(not defined)
[    4.882983] [WMT-DETECT][I]wmt_detect_dump_pin_conf:RST(GPIO-2147483610)
[    4.882987] [WMT-DETECT][I]wmt_detect_dump_pin_conf:BGF_EINT(not defined)
[    4.882990] [WMT-DETECT][I]wmt_detect_dump_pin_conf:BGF_EINT_NUM(not defined)
[    4.882994] [WMT-DETECT][I]wmt_detect_dump_pin_conf:WIFI_EINT(GPIO-2147483644)
[    4.882997] [WMT-DETECT][I]wmt_detect_dump_pin_conf:WIFI_EINT_NUM(not defined)
[    4.883001] [WMT-DETECT][I]wmt_detect_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration emds<=
[    4.883016] [GPIO]   267: Pin number error 2147483647
[    4.883032] [GPIO]   267: Parameter error: 2147483647
[    4.892311] thermal_direct_mode_config(en:0x0,mode:0x1)
[    4.892338] thermal_direct_mode_config(en:0x1,mode:0x1)
[    4.892380] thermal_direct_mode_config(en:0x0,mode:0x1)
[    4.892401] thermal_direct_mode_config(en:0x1,mode:0x1)
[    4.908975] zram: Initialization done!
[    4.957730] [ccci/chr](1)port ccci_fs open with flag 20002 by ccci_fsd
[    4.964288] [cmb_stub] thermal_ctrl_cb null
[    4.972108] emmc expd not ready!
[    4.978039] ram_console: create last_kmsg2 ok.
[    4.995630] [WDK] mode=0 interval=20 timeout=30 enable =32
[    4.995648] fwq2 before set wdt_sys_val =0
[    5.003314] [tsallts_write1]
[    5.005671] after set wdt_sys_val =0,wdt_sys_val=88000000
[    5.005689] [WDK] use reboot mod
[    5.062897] [tsallts_write2]
[    5.179195] [ccci/chr](1)port ccci_monitor open with flag 20002 by ccci_mdinit
[    5.286908] init: sys_prop: permission denied uid:1000  name:persist.dm.lock
[    5.299712] warning: `MtkCodecService' uses 32-bit capabilities (legacy support in use)
[    5.372237] mt_combo_sdio_ctrl: force set sdio port to (3)
[    5.372395] board_sdio_ctrl force off before on
[    5.372406] mtk_wcn_cmb_sdio_off (3)
[    5.373715] mtk_wcn_cmb_sdio_on (3)
[    5.433983] rfkill: input handler disabled
[    5.512492] msdc: 1,mmc_schedule_delayed_work ret= 1
[    5.512576] [WMT-DETECT][I]wmt_detect_unlocked_ioctl:cmd (-2147191038),arg(0)
[    5.512586] [WMT-DETECT][I]wmt_detect_ext_chip_detect:++
[    5.535187] [WMT-DETECT][E]wmt_detect_read_ext_cmb_status(258):WMT-DETECT: WIFI_EINT input status:1
[    5.535203] [WMT-DETECT][I]wmt_detect_ext_chip_detect:external combo chip detected
[    5.558806] [ccci/chr](1)port ttyC2 open with flag 20802 by mtk_agpsd
[    5.567111] mmc1: cannot verify signal voltage switch
[    5.585106] [ccci/chr](1)IOC_RELOAD_MD_TYPE: storing md type(5)!
[    5.669665] type=1400 audit(1441271829.460:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=976 comm="apparmor_parser"
[    5.669714] type=1400 audit(1441271829.460:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=976 comm="apparmor_parser"
[    5.716725] systemd-logind[980]: New seat seat0.
[    5.753934] type=1400 audit(1441271829.550:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default" pid=976 comm="apparmor_parser"
[    5.753983] type=1400 audit(1441271829.550:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-mounting" pid=976 comm="apparmor_parser"
[    5.754011] type=1400 audit(1441271829.550:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-nesting" pid=976 comm="apparmor_parser"
[    5.792844] [ccci/chr](1)CCCI_IOC_UPDATE_SIM_SLOT_CFG get s0:0 s1:0 s2:0 s3:0
[    5.792864] [ccci/chr](1)TODO: how to map slot1 mode & slot2_mode =>sim_mode
[    5.793087] [ccci/cor](0)ccci core boot md0
[    5.793101] [ccci/cor](1)security is off!
[    5.793112] [ccci/mcd](1)CLDMA modem is starting
[    5.793121] [ccci/cor](1)Clear MD region protect...
[    5.793130] [ccci/cor](1)Clear MPU protect MD ROM region<4>
[    5.793142] [ccci/cor](1)Clear MPU protect MD R/W region<5>
[    5.793155] [ccci/com](1)MD0 image postfix=1_lwg_n
[    5.793164] [ccci/com](1)MD0 image postfix=1_lwg_n_E1
[    5.793312] [ccci/cor](1)Find img @CIP
[    5.793325] [ccci/cor](1)try to open modem_1_lwg_n.img
[    5.793347] [ccci/cor](1)try to open modem_1_lwg_n_E1.img
[    5.793364] [ccci/cor](1)try to open modem.img
[    5.793379] [ccci/cor](1)Find img @default
[    5.794588] [ccci/cor](1)try to open modem_1_lwg_n.img
[    5.794642] [ccci/cor](1)open /system/etc/firmware/modem_1_lwg_n.img OK
[    5.794653] [ccci/cor](1)Not cipher image
[    5.794684] [ccci/cor](1)map 6a000000 --> e9a00000
[    5.804039] type=1400 audit(1441271829.600:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=976 comm="apparmor_parser"
[    5.804097] type=1400 audit(1441271829.600:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=976 comm="apparmor_parser"
[    5.804137] type=1400 audit(1441271829.600:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=976 comm="apparmor_parser"
[    5.804173] type=1400 audit(1441271829.600:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=976 comm="apparmor_parser"
[    5.838707] type=1400 audit(1441271829.630:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lxc-start" pid=976 comm="apparmor_parser"
[    5.842846] SLEEP_EN = 0x1
[    5.842880] Linux default SW Flow Control
[    5.853167] [ccci/cor](1)map 6a100000 --> e9c00000
[    5.900863] type=1400 audit(1441271829.690:12): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/media-hub-server" pid=976 comm="apparmor_parser"
[    5.919473] mmc1: new ultra high speed SDR104 SDIO card at address 0001
[    5.920061] [SDIO-DETECT][I]sdio_detect_probe:vendor(0x37a) device(0x6630) num(0x1)
[    5.920088] [SDIO-DETECT][I]hif_sdio_match_chipid_by_dev_id:valid chipId found, index(4), vendor id(0x37a), device id(0x6630), chip id(0x6630)
[    5.920103] set current consys chipid (0x6630)
[    5.920117] after set chipid (0x6630)
[    5.920134] [SDIO-DETECT][I]sdio_detect_probe:autok function detected, func:0xd8a88a00
[    5.924411] [ccci/cor](1)map 6a200000 --> e9e00000
[    5.944125] [ccci/cor](1)map 6a300000 --> ea000000
[    5.974559] [ccci/cor](1)map 6a400000 --> ea200000
[    5.997321] [ccci/cor](1)map 6a500000 --> e3800000
[    6.002608] [SDIO-DETECT][I]hif_sdio_is_chipid_valid:index:4, chipId:0x6630
[    6.002638] [SDIO-DETECT][I]hif_sdio_is_chipid_valid:index:4, chipId:0x6630
[    6.002656] [WMT-DETECT][I]wmt_detect_ext_chip_detect:valid external combo chip id (0x6630)
[    6.002671] [WMT-DETECT][I]wmt_detect_ext_chip_detect:--
[    6.003183] [WMT-DETECT][I]wmt_detect_unlocked_ioctl:cmd (-2147191040),arg(0)
[    6.003221] [WMT-DETECT][I]wmt_detect_unlocked_ioctl:cmd (-2147191032),arg(26160)
[    6.003237] [SDIO-DETECT][I]sdio_detect_do_autok:wait_sdio_autok_ready++
[    6.003253] [AUTO_K][is_sug_more_than_real] RealCount:0, SugCount:1
[    6.003270] [autok_claim_host] msdc3 host claimed
[    6.017002] [ccci/cor](1)map 6a600000 --> e3a00000
[    6.024879] type=1400 audit(1441271829.820:13): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/mediascanner-service-2.0" pid=976 comm="apparmor_parser"
[    6.062902] [ccci/cor](1)map 6a700000 --> e3c00000
[    6.077981] [ccci/cor](1)/system/etc/firmware/modem_1_lwg_n.img, image size=0x7f5d1c, read size:8346908, tail:0
[    6.078024] [ccci/cor](1)**********************MD image check***************************
[    6.078030] [ccci/cor](1)[Warning]md size in md header isn't sync to DFO setting: (03700000, 05000000)
[    6.078034] [ccci/cor](1)Modem header check OK!
[    6.078040] [ccci/cor](1)(MD)[type]=lwg, (AP)[type]=lwg
[    6.078044] [ccci/cor](1)(MD)[plat]=MT6595_S00, (AP)[plat]=MT6595_S00
[    6.078049] [ccci/cor](1)(MD)[size]=3700000, (AP)[size]=5000000
[    6.078053] [ccci/cor](1)(MD)[img_size]=7f5b7c, (AP)[img_size]=7f5b7c
[    6.078058] [ccci/cor](1)(MD)[build_ver]=, [build_time]=2014/09/10 10:16
[    6.078062] [ccci/cor](1)(MD)[product_ver]=Release
[    6.078065] [ccci/cor](1)**********************MD image check***************************
[    6.078072] [ccci/cor](1)Load /system/etc/firmware/modem_1_lwg_n.img (size=0x7f5d1c) to 0x6a000000
[    6.078164] [ccci/cor](1)MPU Start protect MD ROM region<4:6a000000:6a7fffff> b64
[    6.078172] [ccci/cor](1)MPU Start protect MD R/W region<5:6a800000:6effffff> b45
[    6.078179] [ccci/cor](1)MPU Start protect MD Share region<6:6f000000:6f1fffff> b40
[    6.078185] [ccci/cor](1)MPU Start protect AP region<7:40000000:bfffffff> 160
[    6.078195] [ccci/mcd](1)clock buffer, GPIO mode
[    6.078207] [ccci/mcd](1)power off MD first 1
[    6.078211] [ccci/mcd](1)clock buffer, BSI mode
[    6.078241] [ccci/mcd](1)set MD boot slave
[    6.078249] [ccci/mcd](1)CLDMA clock is still off, retry=5
[    6.150651] init: apport-noui (/var/crash/_usr_bin_mediascanner-service-2.0.32011.crash) main process (692) terminated with status 1
[    6.556696] SLEEP_EN = 0x1
[    6.556731] Linux default SW Flow Control
[    6.624029]
[AUTOKK][Stage2] Timediff is 0.2(s)
[    6.624293] [autok_release_host] msdc3 host released
[    6.624310] [SDIO-DETECT][I]sdio_detect_do_autok:wait_sdio_autok_ready--
[    6.624322] [SDIO-DETECT][I]sdio_detect_do_autok:wait_sdio_autok_ready return success
[    6.624369] [WMT-DETECT][I]wmt_detect_unlocked_ioctl:cmd (-2147191033),arg(1784146912)
[    6.624379] [WMT-DETECT][I]wmt_detect_ext_chip_pwr_off:--
[    6.624387] mt_combo_sdio_ctrl: force set sdio port to (3)
[    6.624397] mtk_wcn_cmb_sdio_off (3)
[    6.624964] [SDIO-DETECT][I]sdio_detect_remove:do sdio remove
[    6.625152] mmc1: card 0001 removed
[    6.728319] [mt-i2c]ERROR,454: id=0,addr: 50, transfer error
[    6.728347] [mt-i2c]ERROR,460: I2C_ACKERR
[    6.728742] [mt-i2c]ERROR,454: id=0,addr: 50, transfer error
[    6.728761] [mt-i2c]ERROR,460: I2C_ACKERR
[    6.733533] SLEEP_EN = 0x1
[    6.733555] Linux default SW Flow Control
[    6.742425] [WMT-DETECT][I]wmt_detect_unlocked_ioctl:cmd (1074034433),arg(26160)
[    6.742442] set current consys chipid (0x6630)
[    6.742452] after set chipid (0x6630)
[    6.742464] [WMT-DETECT][I]wmt_detect_unlocked_ioctl:cmd (-2147191035),arg(26160)
[    6.742634] [SDIO-DETECT][I]sdio_detect_exit:sdio_unregister_driver
[    6.742650] [WMT-DETECT][I]wmt_detect_unlocked_ioctl:cmd (-2147191036),arg(26160)
[    6.742662] [WMT-MOD-INIT][I]do_common_drv_init:start to do common driver init, chipid:0x00006630
[    6.742675] [WMT-MOD-INIT][I]do_combo_common_drv_init:start to do combo driver init, chipid:0x00006630
[    6.743884] [WMT-MOD-INIT][I]do_combo_common_drv_init:HIF-SDIO driver init, i_ret:0
[    6.743901] [WMT-STP-EXP][I]mtk_wcn_stp_exp_cb_reg: call stp exp cb reg
[    6.745923] [STPDbg]stp_dbg_init: stp-dbg init
[    6.745993] init: failsafe main process (1171) killed by TERM signal
[    6.749987] [STPDbg]wcn_compressor_init: create compressor OK! L1 32768 bytes, L2 524288 bytes
[    6.750008] [STPDbg]wcn_compressor_reset: OK! compress algorithm 0
[    6.750021] [STPDbg]wcn_core_dump_init: create coredump object OK!
[    6.750288] [WMT-CMB-HW][W]mtk_wcn_cmb_hw_init:invalid pPwrSeqTime parameter, use default hw init sequence parameters
[    6.750340] [cmb_stub] registered, p_stub_cb:0xda35fdf4 size(28)
[    6.750363] [WMT-STP-EXP][I]mtk_wcn_wmt_exp_cb_reg: call wmt exp cb reg
[    6.750533] [CONN-MD-DFT][W]conn_md_add_user:uid (0x80000003) is added to user list successfully
[    6.750618] [WMT-MOD-INIT][I]do_combo_common_drv_init:COMBO COMMON driver init, i_ret:0
[    6.750628] [UART] mtk_wcn_stp_uart_init: mtk_wcn_stp_uart_init(): MTK STP UART driver
[    6.750642] [UART] stp_uart_fifo_init: stp_uart_fifo_init() success.
[    6.750653] [WMT-MOD-INIT][I]do_combo_common_drv_init:STP-UART driver init, i_ret:0
[    6.751032] [WMT-MOD-INIT][I]do_combo_common_drv_init:STP-SDIO driver init, i_ret:0
[    6.751045] [WMT-MOD-INIT][I]do_combo_common_drv_init:finish combo driver init
[    6.751057] [WMT-MOD-INIT][I]do_common_drv_init:finish common driver init
[    6.751067] [BT-MOD-INIT][I]do_bluetooth_drv_init:start to do bluetooth driver init
[    6.751074] FUNC ckt_hci_init
[    6.762342] [mt-i2c]ERROR,454: id=0,addr: 37, transfer error
[    6.762366] [mt-i2c]ERROR,460: I2C_ACKERR
[    6.762453] [mt-i2c]ERROR,454: id=0,addr: 37, transfer error
[    6.762465] [mt-i2c]ERROR,460: I2C_ACKERR
[    6.762630] [mt-i2c]ERROR,454: id=0,addr: 37, transfer error
[    6.762644] [mt-i2c]ERROR,460: I2C_ACKERR
[    6.762776] [mt-i2c]ERROR,454: id=0,addr: 37, transfer error
[    6.762789] [mt-i2c]ERROR,460: I2C_ACKERR
[    6.762872] [mt-i2c]ERROR,454: id=0,addr: 37, transfer error
[    6.762883] [mt-i2c]ERROR,460: I2C_ACKERR
[    6.763547] [mt-i2c]ERROR,454: id=0,addr: 37, transfer error
[    6.763565] [mt-i2c]ERROR,460: I2C_ACKERR
[    6.763653] [mt-i2c]ERROR,454: id=0,addr: 37, transfer error
[    6.763666] [mt-i2c]ERROR,460: I2C_ACKERR
[    6.763750] [mt-i2c]ERROR,454: id=0,addr: 37, transfer error
[    6.763763] [mt-i2c]ERROR,460: I2C_ACKERR
[    6.763851] [mt-i2c]ERROR,454: id=0,addr: 37, transfer error
[    6.763864] [mt-i2c]ERROR,460: I2C_ACKERR
[    6.764053] [mt-i2c]ERROR,454: id=0,addr: 37, transfer error
[    6.764068] [mt-i2c]ERROR,460: I2C_ACKERR
[    6.764215] [mt-i2c]ERROR,454: id=0,addr: 37, transfer error
[    6.764228] [mt-i2c]ERROR,460: I2C_ACKERR
[    6.764361] [mt-i2c]ERROR,454: id=0,addr: 37, transfer error
[    6.764375] [mt-i2c]ERROR,460: I2C_ACKERR
[    6.764458] [mt-i2c]ERROR,454: id=0,addr: 37, transfer error
[    6.764470] [mt-i2c]ERROR,460: I2C_ACKERR
[    6.764629] [mt-i2c]ERROR,454: id=0,addr: 37, transfer error
[    6.764642] [mt-i2c]ERROR,460: I2C_ACKERR
[    6.765082] [mt-i2c]ERROR,454: id=0,addr: 37, transfer error
[    6.765100] [mt-i2c]ERROR,460: I2C_ACKERR
[    6.765158] Flush type = 0 Rx Queue
[    6.765178] [HCI-STP][I]hci_stp_init:HCI STP driver ver 2.0, hdev(0xd6f21000), init done
[    6.765187] [BT-MOD-INIT][I]do_bluetooth_d37, tra:finish blu
[    6.765191] [BT-MOD-INIT][I]do_bluetooth_drv_init:finish bluetooth driver init, i_ret:0
[    6.765197] [GPS-MOD-INIT][I]do_gps_drv_init:start to do gps driver init
[    6.765203] [mt-i2c]ERROR,460: I2C_ACKERR
[    6.765212] mtk_stp_GPS_chrdev driver(major 191) installed.
[    6.765218] [GPS-MOD-INIT][I]do_gps_drv_init:finish gps driver init, i_ret:0
[    6.765223] [FM-MOD-INIT][I]do_fm_drv_init:start to do fm module init
[    6.765227] [FM-MOD-INIT][I]do_fm_drv_init:finish fm module init
[    6.765233] [WLAN-MOD-INIT][I]do_wlan_drv_init:start to do wlan module init
[    6.765246] [MTK-WIFI] WIFI_init: mtk_wmt_WIFI_chrdev driver(major 153) installed.
[    6.765257] [WLAN-MOD-INIT][I]do_wlan_drv_init:WMT-WIFI char dev init, ret:0
[    6.765315] [mt-i2c]ERROR,454: id=0,addr: 37, transfer error
[    6.765324] Reset ALL DBG module log level to DEFAULT!
[    6.765325] [WLAN-MOD-INIT][I]do_wlan_drv_init:WLAN driver init, ret:0
[    6.765330] [WLAN-MOD-INIT][I]do_wlan_drv_init:finish wlan module init
[    6.765339] [mt-i2c]ERROR,460: I2C_ACKERR
[    6.765423] [mt-i2c]ERROR,454: id=0,addr: 37, transfer error
[    6.765437] [mt-i2c]ERROR,460: I2C_ACKERR
[    6.792142] [mtk_wcn_stp_set_if_tx_type] set STP_IF_TX to SDIO.
[    6.792201] [WMT-CONF][E]wmt_conf_set_cfg_file(447):WMT config file is set to (/system/etc/firmware//mt6630_ant_m1.cfg)
[    6.792213] [WMT-CORE][E]opfunc_hif_conf(987):WMT-CORE: WMT HIF info added
[    6.800809] [mt-i2c]ERROR,454: id=0,addr: 37, transfer error
[    6.800835] [mt-i2c]ERROR,460: I2C_ACKERR
[    6.800920] [mt-i2c]ERROR,454: id=0,addr: 37, transfer error
[    6.800933] [mt-i2c]ERROR,460: I2C_ACKERR
[    6.801012] [mt-i2c]ERROR,454: id=0,addr: 37, transfer error
[    6.801024] [mt-i2c]ERROR,460: I2C_ACKERR
[    6.801106] [mt-i2c]ERROR,454: id=0,addr: 37, transfer error
[    6.801118] [mt-i2c]ERROR,460: I2C_ACKERR
[    6.801252] [mt-i2c]ERROR,454: id=0,addr: 37, transfer error
[    6.801265] [mt-i2c]ERROR,460: I2C_ACKERR
[    6.801390] [mt-i2c]ERROR,454: id=0,addr: 37, transfer error
[    6.801405] [mt-i2c]ERROR,460: I2C_ACKERR
[    6.836602] [mt-i2c]ERROR,454: id=0,addr: 10, transfer error
[    6.836624] [mt-i2c]ERROR,460: I2C_ACKERR
[    6.836701] [mt-i2c]ERROR,454: id=0,addr: 10, transfer error
[    6.836711] [mt-i2c]ERROR,460: I2C_ACKERR
[    6.836930] [mt-i2c]ERROR,454: id=0,addr: 10, transfer error
[    6.836940] [mt-i2c]ERROR,460: I2C_ACKERR
[    6.837014] [mt-i2c]ERROR,454: id=0,addr: 10, transfer error
[    6.837023] [mt-i2c]ERROR,460: I2C_ACKERR
[    6.868591] [mt-i2c]ERROR,454: id=0,addr: 10, transfer error
[    6.868611] [mt-i2c]ERROR,460: I2C_ACKERR
[    6.868686] [mt-i2c]ERROR,454: id=0,addr: 10, transfer error
[    6.868754] [mt-i2c]ERROR,460: I2C_ACKERR
[    6.868826] [mt-i2c]ERROR,454: id=0,addr: 50, transfer error
[    6.868835] [mt-i2c]ERROR,460: I2C_ACKERR
[    6.868902] [mt-i2c]ERROR,454: id=0,addr: 10, transfer error
[    6.868911] [mt-i2c]ERROR,460: I2C_ACKERR
[    6.868978] [mt-i2c]ERROR,454: id=0,addr: 10, transfer error
[    6.868987] [mt-i2c]ERROR,460: I2C_ACKERR
[    6.869054] [mt-i2c]ERROR,454: id=0,addr: 50, transfer error
[    6.869063] [mt-i2c]ERROR,460: I2C_ACKERR
[    7.272079] [HCI-STP][I]hci_stp_open:hci0(0xd6f21000)
[    7.272099] ############ BT ON ====>>sec=1441271831, usec=78174
[    7.272117] [STP] mtk_wcn_stp_psm_disable:[W] STP Not Ready, Dont do Sleep/Wakeup
[    7.315269] [ccci/mcd](1)CLDMA clock is on, retry=4
[    7.315293] [ccci/mcd](1)cldma_reset from boot_md_store
[    7.315306] [ccci/mcd](1)cldma_stop from boot_md_store
[    7.315340] [ccci/mcd](1)cldma_start from boot_md_store
[    7.315365] [ccci/mcd](1)CLDMA modem started 0
[    7.315632] [ccci/ken](1)control message 0x0,0x5555FFFF
[    7.315774] [ccci/cor](1)MPU Start protect AP region<7:40000000:bfffffff> 168
[    7.316807] [ccci/mcd](1)random_seed=64e40469,misc_info.feature_2_val[0]=64e40469
[    7.316821] [ccci/mcd](1)**********************************************
[    7.316831] [ccci/mcd](1)Prefix                      CCIF
[    7.316840] [ccci/mcd](1)Platform_L                  MT65
[    7.316849] [ccci/mcd](1)Platform_H                  95E1
[    7.316857] [ccci/mcd](1)DriverVersion               0x20110118
[    7.316865] [ccci/mcd](1)BootChannel                 0
[    7.316873] [ccci/mcd](1)BootingStartID(Mode)        0x0
[    7.316903] [ccci/mcd](1)BootAttributes              0
[    7.316912] [ccci/mcd](1)BootReadyID                 0
[    7.316920] [ccci/mcd](1)ExceShareMemBase            0x41000000
[    7.316931] [ccci/mcd](1)ExceShareMemSize            0x200000
[    7.316941] [ccci/mcd](1)TotalShareMemBase           0x41000000
[    7.316950] [ccci/mcd](1)TotalShareMemSize           0x200000
[    7.316958] [ccci/mcd](1)CheckSum                    0
[    7.316971] [ccci/mcd](1)Postfix                     CCIF
[    7.316981] [ccci/mcd](1)**********************************************
[    7.316991] [ccci/mcd](1)Prefix                      MISC
[    7.317000] [ccci/mcd](1)SupportMask                 0x820
[    7.317008] [ccci/mcd](1)Index                       0x0
[    7.317016] [ccci/mcd](1)Next                        0x0
[    7.317025] [ccci/mcd](1)Feature2                    0x64e40469
[    7.317033] [ccci/mcd](1)Feature4                    0x0
[    7.317042] [ccci/mcd](1)Postfix                     MISC
[    7.317051] [ccci/mcd](1)----------------------------------------------
[    7.374099] SLEEP_EN = 0x1
[    7.374118] Linux default SW Flow Control
[    7.412154] fwu_start_reflash: Start of reflash process:75TPKW
[    7.412189] mtk-tpd 2-0020: fwu_start_reflash: Requesting firmware image rmi4/75TPKW.img
[    7.412240] mtk-tpd 2-0020: fwu_start_reflash: Firmware image size = 96000
[    7.412272] mtk-tpd->parse_header_630:firmware id:1793047
[    7.415076] mtk-tpd->fwu_start_reflash_1676:fw size[16c00],config_size[400]
[    7.415107] mtk-tpd 2-0020: fwu_go_nogo: Device firmware ID = 1793047
[    7.415148] mtk-tpd->synaptics_rmi4_set_gesture_addr_258:fw_id[1793047]
[    7.415456] mtk-tpd 2-0020: fwu_go_nogo: Image firmware ID = 1793047
[    7.415496] mtk-tpd 2-0020: fwu_go_nogo: Device config ID = 0x54 0x57 0x34 0x36
[    7.415527] mtk-tpd 2-0020: fwu_go_nogo: Image config ID = 0x54 0x57 0x34 0x36
[    7.415556] mtk-tpd->fwu_go_nogo_960:image config[TW46],device image[TW46]
[    7.415570] mtk-tpd 2-0020: fwu_go_nogo: No need to do reflash
[    7.415602] mtk-tpd->hw_irq_disable_169:TPD enter sleep start
[    7.458416] mtk-tpd->synaptics_rmi4_set_params_2345:x_max[1152],y_max[1920]
[    7.468192] mtk-tpd->hw_irq_enable_189:TPD wake up
[    7.468330] mtk-tpd->synaptics_rmi4_reset_device_2903:reset time 52
[    7.468343] fwu_start_reflash: End of reflash process
[    7.540086] in get_eint_attribute
[    7.540105] [EINT]CUST_EINT_MD1_CNT:1
[    7.540118] query info: name:MD1_SIM1_HOT_PLUG_EINT, type:6, len:23
[    7.540130] compare string:MD1_SIM1_HOT_PLUG_EINT
[    7.540143] [EINT]srcPin:0
[    7.540161] [ccci/rpc](1)[0x00004005] OK: name:MD1_SIM1_HOT_PLUG_EINT, len:23, type:6, res:0, res_len:4
[    7.540271] in get_eint_attribute
[    7.540282] [EINT]CUST_EINT_MD1_CNT:1
[    7.540296] query info: name:MD1_SIM1_HOT_PLUG_EINT, type:5, len:23
[    7.540329] compare string:MD1_SIM1_HOT_PLUG_EINT
[    7.540338] [EINT]dedicatedEn:0
[    7.540353] [ccci/rpc](1)[0x00004005] OK: name:MD1_SIM1_HOT_PLUG_EINT, len:23, type:5, res:0, res_len:4
[    7.540560] in get_eint_attribute
[    7.540571] [EINT]CUST_EINT_MD1_CNT:1
[    7.540582] query info: name:MD1_SIM2_HOT_PLUG_EINT, type:6, len:23
[    7.540592] compare string:MD1_SIM1_HOT_PLUG_EINT
[    7.540606] [ccci/err/rpc](1)[0x00004005] fail: name:MD1_SIM2_HOT_PLUG_EINT, len:23, type:6, ret:-11
[    7.540802] in get_eint_attribute
[    7.540842] [EINT]CUST_EINT_MD1_CNT:1
[    7.540858] query info: name:MD1_SIM2_HOT_PLUG_EINT, type:5, len:23
[    7.540870] compare string:MD1_SIM1_HOT_PLUG_EINT
[    7.540887] [ccci/err/rpc](1)[0x00004005] fail: name:MD1_SIM2_HOT_PLUG_EINT, len:23, type:5, ret:-11
[    7.541090] in get_eint_attribute
[    7.541103] [EINT]CUST_EINT_MD1_CNT:1
[    7.541114] query info: name:MD1_SIM3_HOT_PLUG_EINT, type:6, len:23
[    7.541127] compare string:MD1_SIM1_HOT_PLUG_EINT
[    7.541144] [ccci/err/rpc](1)[0x00004005] fail: name:MD1_SIM3_HOT_PLUG_EINT, len:23, type:6, ret:-11
[    7.541302] in get_eint_attribute
[    7.541336] [EINT]CUST_EINT_MD1_CNT:1
[    7.541348] query info: name:MD1_SIM3_HOT_PLUG_EINT, type:5, len:23
[    7.541358] compare string:MD1_SIM1_HOT_PLUG_EINT
[    7.541371] [ccci/err/rpc](1)[0x00004005] fail: name:MD1_SIM3_HOT_PLUG_EINT, len:23, type:5, ret:-11
[    7.541501] in get_eint_attribute
[    7.541513] [EINT]CUST_EINT_MD1_CNT:1
[    7.541523] query info: name:MD1_SIM4_HOT_PLUG_EINT, type:6, len:23
[    7.541531] compare string:MD1_SIM1_HOT_PLUG_EINT
[    7.541547] [ccci/err/rpc](1)[0x00004005] fail: name:MD1_SIM4_HOT_PLUG_EINT, len:23, type:6, ret:-11
[    7.541695] in get_eint_attribute
[    7.541704] [EINT]CUST_EINT_MD1_CNT:1
[    7.541713] query info: name:MD1_SIM4_HOT_PLUG_EINT, type:5, len:23
[    7.541745] compare string:MD1_SIM1_HOT_PLUG_EINT
[    7.541763] [ccci/err/rpc](1)[0x00004005] fail: name:MD1_SIM4_HOT_PLUG_EINT, len:23, type:5, ret:-11
[    7.592076] [WMT-PLAT][E]wmt_plat_i2s_ctrl(1167):[MT662x]Error:FM digital mode set, but no I2S GPIOs defined
[    7.592535] mt_combo_sdio_ctrl: force set sdio port to (3)
[    7.592550] board_sdio_ctrl force off before on
[    7.592557] mtk_wcn_cmb_sdio_off (3)
[    7.592651] mtk_wcn_cmb_sdio_on (3)
[    7.619437] systemd-logind[980]: Failed to start user service: Unknown unit: user@32011.service
[    7.626693] systemd-logind[980]: New session c1 of user phablet.
[    7.634148] systemd-logind[980]: Failed to apply ACLs: Operation not supported
[    7.642115] msdc: 1,mmc_schedule_delayed_work ret= 1
[    7.668006] [ccci/ken](1)control message 0x0,0x0
[    7.676591] [ccci/chr](1)port ttyC0 open with flag 20902 by gsm0710muxd
[    7.687871] mmc1: cannot verify signal voltage switch
[    7.696811] [ccci/ken](1)IPC_RPC_GET_RF_CLK_BUF count=4
[    7.766112] [MTK-WIFI] WIFI_open: WIFI_open: major 153 minor 0 (pid 712)
[    7.766125] [MTK-WIFI] WIFI_write: WIFI_write 1
[    7.766136] [WMT-PLAT][W]wmt_plat_wake_lock_ctrl:WMT-PLAT: wakelock status(1), counter(2)
[    7.766172] [WMT-DETECT][I]wmt_detect_close:close major 154 minor 0 (pid 847)
[    7.882868] mmc1: new ultra high speed SDR104 SDIO card at address 0001
[    7.972334] sdio_irq_enable_flag:1
[    7.972831] Flush type = 4 Rx Queue
[    8.328709] [STPDbg]stp_dbg_set_version_info: chipid(0x6630),wifiver(),romver(E3),patchver(20150202),branchver(ALPS)
[    8.345578] [STP] mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
[    8.879324] [WMT-PLAT][W]wmt_plat_wake_lock_ctrl:WMT-PLAT: wakelock status(1), counter(1)
[    8.879379]  ############BT ON <====>sec=1441271832, usec=685453
[    8.879391] [WMT-STP-EXP][I]mtk_wcn_wmt_func_on: mtk_wcn_wmt_func_on_f type(0)
[    8.879400] [HCI-STP][I]hci_stp_open:WMT turn on BT OK!
[    8.879410] Flush type = 0 Rx Queue
[    8.879562] [HCI-STP][I]hci_stp_dev_init_work:Load custom BT config success
[    8.884659] [HCI-STP][W]file_write:Failed to open /data/bluetooth/BT.cfg!
[    8.904971] [HCI-STP][I]hci_stp_open:hci_stp_dev_init ok
[    8.904995] Flush type = 0 Rx Queue
[    9.017487] WQ warning! work (hci_power_on, d6f215e0) execute more than 1 sec, time: 2252933615 ns
[    9.028053] txc_ps_enable_store:enable 0
[    9.028123] pa12201001 disable ps sensor
[    9.028958] [ALS/PS] CFG0 Status: 0
[    9.032226] [AUTO_K][is_sug_more_than_real] RealCount:1, SugCount:1
[    9.032285] [autok_claim_host] msdc3 host claimed
[    9.034380] [autok_release_host] msdc3 host released
[    9.433230] wlanLoadManufactureData_5G[MTK-WIFI] register_set_p2p_mode_handler: (pid 1214) register set p2p mode handler c055dd98
[    9.434800] [WMT-STP-EXP][I]mtk_wcn_wmt_func_on: mtk_wcn_wmt_func_on_f type(3)
[    9.434819] [MTK-WIFI] WIFI_write: WMT turn on WIFI success!
[    9.434884] [MTK-WIFI] WIFI_close: WIFI_close: major 153 minor 0 (pid 712)
[    9.444660] [CONN-MD-DFT][I]conn_md_thread:no msg queued in msg queue...
[    9.485519] [mtk_net][sched]dev_activate dev = wlan0
[    9.503199] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    9.687715] mtk_cfg80211_scan_690:recive scan command from user space
[    9.743394] [Ker_PM][request_suspend_state]wakeup (0->0) at 9681365845 (2015-09-03 09:17:13.549449615 UTC)
[   10.208336] init: sys_prop: permission denied uid:32011  name:bwc.mm.VideoDecodeCodec
[   10.211487] concurrency scenario CON_SCE_VP ON
[   10.212431] init: sys_prop: permission denied uid:32011  name:bwc.mm._Profile
[    9.722372] ApplyDLNewIFFrequency with frequency = 48000ApplyDLNewIFFrequency with frequency = 48000
[   10.546698] [ccci/chr](1)port ccci_aud open with flag 20002 by pulseaudio
[   11.311246] [wlan]mtk_cfg80211_connect
[   11.332664] mtk_cfg80211_connect:965 (SEC WARN) [wapi] set wapi assoc info error:c0010014
[   11.337730] [ccci/chr](1)port ccci_ioctl1 open with flag 20802 by rild
[   11.337782] [ccci/chr](1)port ccci_ioctl1 close rx_len=0 empty=1
[   11.360333] [mtk_net][sched]dev_activate dev = wlan0
[   11.360373] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   11.775144] init: ubuntu-location-provider-here-after-wizard main process (2154) killed by TERM signal
[   11.778902] audit_printk_skb: 456 callbacks suppressed
[   11.778923] type=1400 audit(1441271835.570:166): apparmor="DENIED" operation="open" profile="/usr/lib/telepathy/mission-control-5" name="/custom/xdg/data/dconf/profile/custom" pid=2122 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=32011 ouid=0
[   12.144570] in get_eint_attribute
[   12.144592] [EINT]CUST_EINT_MD1_CNT:1
[   12.144607] query info: name:MD1_SIM1_HOT_PLUG_EINT, type:0, len:23
[   12.144620] compare string:MD1_SIM1_HOT_PLUG_EINT
[   12.144633] [EINT]eint_num:0
[   12.144651] [ccci/rpc](1)[0x00004005] OK: name:MD1_SIM1_HOT_PLUG_EINT, len:23, type:0, res:0, res_len:4
[   12.145267] in get_eint_attribute
[   12.145286] [EINT]CUST_EINT_MD1_CNT:1
[   12.145297] query info: name:MD1_SIM1_HOT_PLUG_EINT, type:1, len:23
[   12.145305] compare string:MD1_SIM1_HOT_PLUG_EINT
[   12.145313] [EINT]eint_deb:100
[   12.145327] [ccci/rpc](1)[0x00004005] OK: name:MD1_SIM1_HOT_PLUG_EINT, len:23, type:1, res:100, res_len:4
[   12.146495] in get_eint_attribute
[   12.146514] [EINT]CUST_EINT_MD1_CNT:1
[   12.146526] query info: name:MD1_SIM1_HOT_PLUG_EINT, type:2, len:23
[   12.146536] compare string:MD1_SIM1_HOT_PLUG_EINT
[   12.146547] [EINT]eint_pol:0
[   12.146565] [ccci/rpc](1)[0x00004005] OK: name:MD1_SIM1_HOT_PLUG_EINT, len:23, type:2, res:0, res_len:4
[   12.147779] in get_eint_attribute
[   12.147801] [EINT]CUST_EINT_MD1_CNT:1
[   12.147813] query info: name:MD1_SIM1_HOT_PLUG_EINT, type:3, len:23
[   12.147822] compare string:MD1_SIM1_HOT_PLUG_EINT
[   12.147831] [EINT]eint_sens:0
[   12.147846] [ccci/rpc](1)[0x00004005] OK: name:MD1_SIM1_HOT_PLUG_EINT, len:23, type:3, res:0, res_len:4
[   12.148324] in get_eint_attribute
[   12.148341] [EINT]CUST_EINT_MD1_CNT:1
[   12.148352] query info: name:MD1_SIM1_HOT_PLUG_EINT, type:4, len:23
[   12.148362] compare string:MD1_SIM1_HOT_PLUG_EINT
[   12.148373] [EINT]socket_type:1
[   12.148389] [ccci/rpc](1)[0x00004005] OK: name:MD1_SIM1_HOT_PLUG_EINT, len:23, type:4, res:1, res_len:4
[   12.425521] systemd-logind[980]: Failed to start user service: Unknown unit: user@0.service
[   12.443399] systemd-logind[980]: New session c2 of user root.
[   12.516246] [adb]adb_open start, adb_open: c03b0bc4 check adb_release c03b0b3c, open_release_pair: 0
[   12.804370] type=1400 audit(1441271836.600:167): apparmor="DENIED" operation="open" profile="/usr/lib/telepathy/telepathy-ofono" name="/dev/tty" pid=2334 comm="telepathy-ofono" requested_mask="r" denied_mask="r" fsuid=32011 ouid=0
[   13.571201] init: sys_prop: permission denied uid:32011  name:bwc.mm.VideoDecodeCodec
[   13.575950] concurrency scenario CON_SCE_VP ON
[   13.576956] init: sys_prop: permission denied uid:32011  name:bwc.mm._Profile
[   13.646340] [LK_ENV]get_env persist.radio.cfu.querytype
[   12.516261] [adb]adb_open end, open_release_pair: 1
[   13.646352] [SYSENV_KL]
[   13.646358] [LK_ENV]ENV initialize
[   13.652311] [LK_ENV]ENV initialize sucess
[   13.652321] [SYSENV_KL][LK_ENV]load default env
[   13.652333] [LK_ENV]get_env data_free_size_th
[   13.652340] [SYSENV_KL][LK_ENV]find data_free_size_th = 3200000
[   13.652352] [lk_env]cann't find persist.radio.cfu.querytype
[   13.742671] [CONN-MD-DFT][I]conn_md_thread:no msg queued in msg queue...
[   13.742705] [CONN-MD-DFT][I]conn_md_thread:no msg queued in msg queue...
[   13.742723] [CONN-MD-DFT][I]conn_md_thread:no msg queued in msg queue...
[   13.752180] [WMT-DFT][E]wmt_idc_msg_to_lte_handing(189):there is no coex data in stp buffer
[   13.758724] [ccci/chr](1)port ccci_ioctl1 open with flag 20802 by rild
[   13.758755] [ccci/chr](1)port ccci_ioctl1 close rx_len=0 empty=1
[   13.761561] [CONN-MD-DFT][I]conn_md_thread:no msg queued in msg queue...
[   13.761590] [CONN-MD-DFT][I]conn_md_thread:no msg queued in msg queue...
[   13.772174] [WMT-DFT][E]wmt_idc_msg_to_lte_handing(189):there is no coex data in stp buffer
[   16.217930] [CONN-MD-DFT][I]conn_md_thread:no msg queued in msg queue...
[   16.464989] [LED]store_blink: 0.
[   16.813586] Adding 524284k swap on /dev/zram0.  Priority:-2 extents:1 across:524284k SS
[   16.825182] [HIB/SWAP] [SYSC_swapoff] file(/userdata/SWAP.img) current(de847b40/2672/swapoff) current->mm(d88a9000)
 217.966201] mtk_cfg80211_scan_690:recive scan command from user space


With freedom comes great responsibility!